body and interior Show Us Your Center Console/radio Setup

[peterschop]

Another stocker with Behr a/c and Becker Europa II radio and the rubber shift boot that will not stay in place when I shift. Oh, there is also the clip on bracket for my phone.

 

['76mintgrün'02]

and the rubber shift boot that will not stay in place when I shift

 

I have that problem sometimes with my replacement boot as well.  I think it might be from the rubber treatment, or something I put on the plastic piece.  I am tired of putting it back on.  I have a roll of two sided tape which is very thin.  I think I will wrap the lip with that to make it stay.  It will still be removable that way. 

[182kartracer]

The face is a single piece of sheet steel that i bent and painted.

[zinz]

Stock console:

Sound system under the hood:

Speaker in back under bumper:

That is all...

Ed Z

[bento]

Here's my empty void where a console should be. Thanks everyone for all the ideas.

[grizzlebar]

[autobon7]

our 71...simple layout

 

Love your int .......what is/where did you find the parking brake surround? Like the arm rest.

[esty]

here's one of a few threads where i discussed the armrest  http://www.bmw2002faq.com/topic/135987-center-arm-reststorageremade/

 

92-95 honda civic

 

http://www.ebay.com/sch/i.html?_ipg=&_from=&_armrs=1&_nkw=honda+civic+armrest&_nkwusc=honda+civiv+armrest&_rdc=1

 

http://www.ebay.com/sch/i.html?_odkw=honda+civic+armrest&_osacat=0&_armrs=1&_trksid=p2045573.m570.l1313&_nkw=1992-95+honda+civic+armrest&_sacat=0&_from=R40

[billpatterson]

Gotta have sound and cup holders...

 

Regards

[bmdubl02]

 I'm curious how any/all of you have attached the console to the underside of the dash. Mine has a homebrew piece of angled metal at the top, and after I removed/replaced the console after installing new carpet there's a slight gap at the top.

Also wondering if there's an attachment point to the trans hump behind the gearshift, as I've heard some say yes, others say no.

 

Just seems that it (the console) should be more secure, not that mine is overly loose however.

[MikeWooldridge]

That same bracket at the top is on my car. There should be a screw hole immediately in front of the "cubbyhole".

[jrhone]

That's my setup. I did a custom center section. Painted black lacquer. Added vdo viewline gauges. Radio is a Nakamichi cd500. I added a clock and cubbyhole from an e36. I then recovered the sides in a black leather like vinyl.

[Buckeye]

I'm curious how any/all of you have attached the console to the underside of the dash. Mine has a homebrew piece of angled metal at the top, and after I removed/replaced the console after installing new carpet there's a slight gap at the top.

Also wondering if there's an attachment point to the trans hump behind the gearshift, as I've heard some say yes, others say no.

Just seems that it (the console) should be more secure, not that mine is overly loose however.

"L" bracket attached to console then to underneath dash. At the bottom of second picture can see what that bracket looks like. Not sure if you buy new. May want to ask Bluntech.

Edited September 28, 2014 by Buckeye

[bmdubl02]

Thanks Buckeye - yup, that's the L bracket that exists on mine.

Thanks for the info, time to fix things.

[76white02]

I just finished this console up this week.