Jump to content

ohioplatt

Solex
 View Profile  See their activity

  • Posts

    123

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by ohioplatt

  1. ohioplatt
    Another place to check is(are?) the tubes that go up to the handbrake. A weird thing happened to me. During the winter when it was too cold o do anything else in the garage I tried to install my parking brake cables and they were blocked! Trying everything from fishtape to a small steel rod to get them through I finally realized that they were plugged up with ice. Heating up the tubes with my heat gun I was able to get a small home made fishtape through each tube. I knew I needed to get that moisture out so with a mix of brake clean, PB Blaster, shop towel strips and compressed air I was able to clean a lot of gunk out of those tubes. Good place to clean if you want to make those cables slide unobstructed. Larry
  2. ohioplatt
    Best 3-5 years of my life. Just couldn't leave it behind.
  3. ohioplatt
    Original to the car. I had a guy turn them down to minimum[emoji6]. I have some on order[emoji2] Sent from my iPod touch using Tapatalk
  4. ohioplatt
    Been so long that I added to this I figured I would at least show something. Moving along ever so slowly.
  5. ohioplatt
    Thanks Jim! I am still pecking away at mechanical stuff and trying not to get sidetracked but letting my mind wander. Helps alot Larry
  6. ohioplatt
    I hate to hijack your thread but I am wondering what is under those pillars? Foam or some other kind of backing? I am trying to put together a car that I have never seen together so I am at somewhat of a disadvantage. Thanks(if you can help), Larry
  7. ohioplatt
    errrrr! This thread makes me feel so slow and uninformed! Actually I love to watch the progress. Nice!
  8. ohioplatt
    Hmmm, that explains what I say about my car on those not so good days.
  9. ohioplatt
    Could you send me one of your handbrake kits please? I will follow the palpal instructions. Regards, Larry
  10. ohioplatt
    So, are you looking for an objective opinion or some support to build a case to buying a car? You do know the house to which you are playing I am sure.
  11. ohioplatt
    So Andrew of course if someone sources rebuilds from you, IE checks and makes sure that the front and back match??
  12. ohioplatt
    If that squeal comes from your belt check your battery. Nothing like giving your alt a workout it does not really need if it is trying to charge a bad battery. Lesson learned from my vanagon.
  13. ohioplatt
    Sorry for your loss. Larry
  14. ohioplatt
    Ah, capitalism. What the market will bear. That kind of thing.
  15. ohioplatt
    Though I have no experience in AC in a 2002 my parts car does have all the parts to install the Frigiking system. That of course is not my focus and who knows, I might never get to that point in my car. That said, I have a Vanagon/Westy that are notorious for inferior AC systems. In trying to get some kind of cool going inside of that I used http://www.redtek.com/home.html It maybe just my imagination but it did seem to be the coldest that system ever functioned. Of course I had installed a new compressor, receiver/dryer and cleaned the system. Just a little FYI Larry
  16. ohioplatt
    Damaged bearings? If so a rebuild with an IE kit is in order. No bearings in that kit, just the seals needed to get rid of that nasty grease stain. Damaged bearings? If so a rebuild with an IE kit is in order. No bearings in that kit, just the seals needed to get rid of that nasty grease stain.
  17. ohioplatt
    Sub frame removed media blasted, reenforced and painted. No snorkel. I believe the the front end to be original to the car..
  18. ohioplatt
    It seems like it takes too long to make any progress, but I finally got my car back down on all fours today. Now it is time to get it back up in the air and start on the brakes
  19. ohioplatt
    Pretty, pretty, pretty.
  20. ohioplatt
    Thanks for all the responses guys. And buckeye thanks also for the kind (car) words.
  21. ohioplatt
    Okay, here are the bearings in question. Well, one of them the other looks like this one. This thing just looks a little whimpy to hold up on 1/4 of a car, along with everything else that you ask it to do. So, to kind of refine my question. If this is a good bearing any pictures of bad bearings?
  22. ohioplatt
    That is the rub Minty. these are brand new bearings. I got them sometime in the last year. I do not remember taking them out of a box, so no identifying marks. seems I bought them from some place that had tii in his name, Roger that? So I guess I will just continue my building of the struts (proper washer order) and see what happens. Thanks for the responses.
  23. ohioplatt
    I have bought new ones and they are what I plan to install. It just seems there are good new ones and bad new ones.
  24. ohioplatt
    In rebuilding my front end and reading all the posts about it I have come find out that there is a range from "not worth putting on your car" to "this is what you need". I have some bearings, how do I tell what is and what is not ok? any visual clues? Sorry to offend if this has been covered before and I should be able to find what I am looking for with search.
  25. ohioplatt
    Price:: 75.00 Location: : Lebanon, OH MIrrors for sale. Drivers side a little crusty and passenger side as far as I know never been mounted. What you see is what you get. Missing gasket for drivers side. Not sure what else is needed. The drivers mirror was on a car I parted years ago and the passenger side came along with the car. Do not know what is fair so I will start at $75.oo or offer. Plus shipping SOLD SOLD SOLD
×
×
  • Create New...