Jump to content

us4736

Solex
 View Profile  See their activity

  • Posts

    256

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by us4736

  1. us4736
    do you still have the ignition switch for sale if u do ill take it
  2. us4736
    Danbury ct
  3. us4736
    yes car is still for sale
  4. us4736
    car was built from the ground up 5 year ago. 88 s14 with 90k miles on it with M3 5 speed ,3.73 posi rear 4 wheel disc brake all wilwood calipers all ss an Kevlar lines ,custom exhaust ,full cage,gages,sway bars,all bushing new,tilton pedal setup, two recaro seat an 5 point belts. car has passed scca inspes ...I did one driving school with it at lime rock park an many autocrosses with it ..car is street legal .I have over 25k invested in this car I had a accident at work a year ago an can no longer drive a stick .asking 35k you email at US4736@snet.net or call 203 349 0179 for any question
  5. us4736
    price,price,price anything else with it ECU ,wiring harness ????
  6. us4736
    thats a big job they just don't bolt on . the fronts are easy the fenders are single wall but the rears are double wall and have to be welded. you also need a nutcert tool to install the nutcerts to fasten the flares . the OEM flares are the best ones out their and are about 100$ each and at least 8 or 10 hours of labor and thats with out paint
  7. us4736
    just bend up a piece alum like this
  8. us4736
    (nt) JC whitney 1/2" hood insulation about 80$
  9. us4736
    i like the KAR-02L better than the other one , whats the rules down their can't you just get karl 02 or is it taken
  10. us4736
    i would'nt sell mine for less than 20k and thats about what i have into it
  11. us4736
    heres my dune buggy with a 66 2.0 lilter with solex carbs http://s668.photobucket.com/albums/vv41/us4736/911%20motor/ sorry try this http://s668.photobucket.com/albums/vv41/us4736/911%20motor/911-2/
  12. us4736
    finshed mine last summer can't wait for the nice weather
  13. us4736
    billy mays would use mighty putty
  14. us4736
    you think this guy is nuts check this one http://jalopnik.com/5065896/hand+made-lamborghini-built-in-basement-finally-sees-light-of-day
  15. us4736
    i have the 300# springs on the rear and 450# on the front but i have a s14 motor about 80#s heavier than a M10 the car sits about 2" lower and rides very hard . and my front struts are shortend 2" also .it bottoms out on some speed bumps and my front spoiler has hit a few things but the car handles great
  16. us4736
    for 110$ for a 20" one i'll stick with my pipe
  17. us4736
    he must be out of town i spoke to him about a mouth ago he asked my emails even called me on the phone
  18. us4736
    jc witney has is about 90$ for a sheet of 1/2''
  19. us4736
    (nt)
  20. us4736
    matt what time does it start ????
  21. us4736
    did my 1st drivers ed yesterday at lime rock in the M2 and it all stayed together . water temp, oil press and temp were all good . i kept up in all the corners but those E36 M3's are fuckin fast in the strights. i did 4 20 minute sessions and class in between track time . had a great time next one is oct 10
  22. us4736
    anybody have lee's phone # from massive brakes i need to ask about a front brake setup for my m2 . i don't have enough front brakes the stock ones aren't cutting it
  23. us4736
    steve one of the best looking 02's i've seen i had no idea the car was this nice this is the first pic i've seen . good luck with it and congrats on the best in show .
  24. us4736
    tony i don't have a speedo ihave oil temp,oil press,water temp,volts,tach and the gas gauge is next to the red knob for the brakes .all the gauges are autometer the gas gauge is also autometer universal gauge thats not hooked up yet
  25. us4736
    2 1/2 inch thats as big as he could get in . its a little loud if its to bad i'll put a short resannator in the center section
×
×
  • Create New...