Jace
-
Posts
321 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
0%
Content Type
Profiles
Forums
Blogs
Gallery
Events
Store
Books
Community Map
Videos Directory
Everything posted by Jace
-
How to rebuild a Heater box, YouTube video
Jace replied to ClassDavid's topic in BMW 2002 and other '02
this was great David, I subbed to you a few months ago. Mintgrün represent! -
my URO lens studs weren't perfect but a very slight bend inwards got them into their holes and i'm very happy with them otherwise.
-
put another 370Km on the odometer (now that it works) and tried on some hubcaps i purchased recently.
-
From the album: Australian Mintgrün '75
-
From the album: Australian Mintgrün '75
-
From the album: Australian Mintgrün '75
-
From the album: Australian Mintgrün '75
-
From the album: Australian Mintgrün '75
-
From the album: Australian Mintgrün '75
-
steer clear of new bilsteins, they don't fit in standard strut tubes
-
LSD casings... wider than standard diff casings?
Jace replied to Jace's topic in BMW 2002 and other '02
Thanks a bunch, that didn't occur to me obviously so i really appreciate the guidance. -
Hello gents and ladies, I have an LSD centre to put into my E21 diff casing. The centre will not drop in with the crown wheel attached. the width from bearing to bearing is the same as the open centre that im replacing. My question is, do the factory LSD casings have more clearance on the sides?
-
the last best remaining forum
-
that is pretty much all you do. try levering with a plastic trim clip tool or something a bit softer than a screwdriver, bit of heat from a hair dryer or heatgun might help too
-
I had the same issue with the IE shifter and shifter plate hitting where the link pin attaches it to the shift shaft. I notched a angled section of the support for the shift plate on the side with the least clearance and it has been that way for 6 years or so.
-
These are still working, which is fairly impressive for 40 y/o paper cone speakers These should be a good upgrade I suspect installed at a dealership in the late '70s where it also got the sunroof and vinyl roof covering. And done, you'd never even know besides the better sound quality! The old covers snapped right into place,
-
+1 thats for the kinda-castelated exhaust nuts on older bikes
-
RHD engine bay pictures needed of brakelines for servos
Jace replied to Martin Nobbs's topic in BMW 2002 and other '02
also interested to know... -
completed a 1300Km/800mi drive around the state, cut short by going into another statewide covid lockdown.
-
i have a set of 5 tucked away but don't have hubcaps for those either.
-
I have 13x4.5 roundie steelies, not about to spend AU$300+ to buy some hub caps that might not fit my wheels. thanks though
-
i love this stupid little car someone sell me some dog dish hubcaps please
