efi Look Ma, No Distributor (megasquirt porn)

[finkbuilt]

I slapped in the EDIS today. Worked great right of the bat, I was astounded! (astounded that I didnt have to redo my mistakes 3 times like usual)

Thanks for the Advance map Tim!

steve

http://www.finkbuilt.com/blog/

[Harv]

Great!

Are you running the MSII processor? or MSNS?(the code with the ignition)

John

[pkbinplano]

all over myself looking at that LOL

[jlandreth]

(nt)

[rho]

Very nice... how much $$$ do you have into that conversion?

I may think about something similar.

[finkbuilt]

Great!

Are you running the MSII processor? or MSNS?(the code with the ignition)

John

Yessir, MSII PCB3.

s

[finkbuilt]

Very nice... how much $$$ do you have into that conversion?

I may think about something similar.

I dont know. I am not doing the best accounting. The EDIS stuff was $80.00 including trigger wheel, wires, module, VR sensor and coil. (ford escort) I probably have another $600 into the ECU and fuel system which I havn't installed yet. Your biggest investment will of course be time.

[dubois]

I am getting close to that one in my list! I will email you when times comes!

[robspeed]

just a thought, but you might consider moving that module there off that fenderwall, and put it back on the firewall behind the engine, basically in the centerline of the car area... thats where i put my e30 318i ignition module, as i found its a much cooler and dryer spot than that fender location... P.s. nice frickin job...

[TimMN]

I'm glad the map helped out.

Tim

[TobyB]

there's a carby!

When are you going to 'squirt it?

t

[PSloan]

What kind of car is this piece from? I cant find one that will clear the mechanical fuel pump. At least I cant find one with more than one port for a sensor.

[PSloan]

Okay - nevermind. I found on your site that it's from a 318i. I had been trying to use a 320i piece.

Thanks!

[finkbuilt]

just a thought, but you might consider moving that module there off that fenderwall, and put it back on the firewall behind the engine

Not a bad Idea. That exhaust side of the bay gets pretty hot.

I was thinking that I might move it inside the headlight area.

[robspeed]

just a thought, but you might consider moving that module there off that fenderwall, and put it back on the firewall behind the engine

Not a bad Idea. That exhaust side of the bay gets pretty hot.

I was thinking that I might move it inside the headlight area.

inside there is too wet, i think. if anything, id move it inside car before putting it further forward...