Help with air dam identification

[lunarkingdom]

Can I get some help in identifying this specific air dam? Having a hard time finding it myself. This car was built in Japan.

[2002iii]

Looks like the one Ireland Engineering sells

[lunarkingdom]

21 minutes ago, 2002iii said:

Looks like the one Ireland Engineering sells

80% does look like the turbo style one but this one has different holes in front.

[2002iii]

I meant this one:

[lunarkingdom]

The holes are good but the sides are different. I do believe this is the closest match but the one in the pictures I posted looks like an upgraded version of this one. Until I saw it I never considered having anything but the front bumper on my 02.

[stone02]

the one on the white car was made by Zender.

 

[lunarkingdom]

3 hours ago, stone02 said:

the one on the white car was made by Zender.

 

Only interested in figuring out where the one in the pictures I posted is from, thanks.

[visionaut]

I’ll say it’s a custom formed unit. I’ve never seen an 02airdam with what looks like a full bumper edge formed into the top, and the lower turned edge is larger/deeper than the Kamei or Turbo ones… so likely a one off, either made from scratch or more likely by modifying an existing dam.

Cahsel’s has examples of all the ‘more common’ ones… (you can spend hours browsing/drooling there).

https://cahsel.de/en/spares-bmw02/grp/

[02Les]

not much different than the old BMP ones

[visionaut]

It has 3 portholes in front - the outers (ducts/lights) look Zenderish with that partial cover/step down - but it also has a center (oil cooler) like Turbo/Kamei dams. Seems to borrow elements from many…

 

Definitely custom - look how the top trailing edges of the airdam are blended to the fender lips. The upper dam molding fades/tapers out before the ends.

Edited November 12, 2023 by visionaut

[2002iii]

It could be this one available on Ebay

 

Or this one I found on Google, but the link doesn't work anymore.

Edited November 13, 2023 by 2002iii
Another one

[lunarkingdom]

What did it say about the last one on google? That has to be it! Nice work man!

Edited November 13, 2023 by lunarkingdom

[Einspritz]

Looks to be a modified Kamei, the original has no brake ducts, but has a center opening, which could be used for an oil cooler or modified for brake duct hose to both sides. Which I did.

[2002iii]

Turns out it is an old Zender, found Here.

[Pablo M]

nvm

 

 

Edited November 17, 2023 by Pablo M