Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Do you know where this ground wire attached


Recommended Posts

I am working on 1974 BMW E10 -2002.

I am not sure if is part of Heater box, Bear AC, or wiper motor. I do not remember which one and the location that is attached.

It is definitely a ground connection. It is about 5 inches long and about 1/2 inches wide, it is covered with black insulation from factory. 

Please see the picture attached.

 

Thank you and have a good weekend.

Regards,

Jay

 

IMG_2935[1].JPG

IMG_2934[1].JPG

Edited by Radio Fixer
Link to comment
Share on other sites

The heater box ground on my car is a small braided strap.  The wiper ground is a straight brown wire.  I don't have AC, so maybe part of your Bear "Behr" AC?  I've disassembled a lot of these cars and never seen a factory ground strap like that one.  

 

Mark92131

  • Like 1

1970 BMW 1600 (Nevada)

 

 

Link to comment
Share on other sites

5 minutes ago, stephers said:

Hood to body ?   Was a part that came with radio install kit

Having installed more than a few Blaupunkt radios in my brief career as a parts guy at a Renault/Peugeot dealership, I remember just such a strap as part of the extensive installation kit thoughtfully provided by the German makers (long before Blaupunkt outsourced their radios to Japan).  If not for the hood, somewhere else on the car as an anti-static ground--even the radio chassis itself.  There was also a condenser to be fastened to the alternator's B+ terminal.

 

mike

  • Like 1

'69 Nevada sunroof-Wolfgang-bought new
'73 Sahara sunroof-Ludwig-since '78
'91 Brillantrot 318is sunroof-Georg Friederich 
Fiat Topolini (Benito & Luigi), Renault 4CVs (Anatole, Lucky Pierre, Brigette) & Kermit, the Bugeye Sprite

Link to comment
Share on other sites

21 hours ago, Mike Self said:

  There was also a condenser to be fastened to the alternator's B+ terminal.

 

mike

So THAT'S why a few alternators have that!

 

I always wondered, because it seemed period, but also not all that common, and not 'factory'

but NOT aftermarket, either.

 

That said, a condenser on an alternator output's not going to do a lot of noise suppression.

It'd work a lot better on a generator's switching noise...

 

t

would suppress the slip rings, tho.

"I learn best through painful, expensive experience, so I feel like I've gotten my money's worth." MattL

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...