Talk me off the ledge ****INSTALLED****

[ray_]

9 minutes ago, conkitchen said:

It's for when the Cop asks "do you know how fast you were going" 

That actually happened to me. I ended up with a ticket for defective equipment. 😁

 

Which I got out of when I showed the judge my correspondence with North Hollywood Speedometer. 

[conkitchen]

4 minutes ago, ray_ said:

 a ticket for defective equipment. 😁

Good thing the Cops don't write tickets for other "defective equipment" on 2002's 

 

We ALL would be in jail.

[OriginalOwner]

con posted this picture ......

 

 

 

And I noticed that interestingly very very custom Shift Pattern on top of the shift lever ...... way cool !!!!

 

 

Cheers,

 

Carl

 

[Pablo M]

2 hours ago, conkitchen said:

So there I was, staring into abyss of stuff I have laying around. I found a vintage roundel. You know the ones with the clear rubber coating. Perfect.  

 

Had to hook up a ground wire for the horn button and did a slight refinishing of the aloomineeum horn cover ring. The China finish was a wee bit stupid so I chucked it up in the lathe and spun sanded/polished it. 

 

Have to say, I like it except the wood wheel is really smooth and hard.  

 

but what do I know-(how many is that now Ryan?) 

That looks amazing. Is it compatible with a Momo adapter or did it come with its own? 

[conkitchen]

3 hours ago, OriginalOwner said:

And I noticed that interestingly very very custom Shift Pattern on top of the shift lever ...... way cool !!!!

Cheers,

Carl

I'm a side shifter

Edited January 19, 2023 by conkitchen

[conkitchen]

2 hours ago, Pablo M said:

That looks amazing. Is it compatible with a Momo adapter or did it come with its own? 

 

I had an adaptor laying around which had no markings. All I had to do really was the following. 

 

1) Machined off the concentric ring of the hub. 

2) Re-drilled and tapped new bolt holes and pattern for this wheel. 

3) Added a ground wire for the horn button

4) Re-used the horn contact from the stock wheel 

5) lil custom touches like the roundel and horn ring spun finish.  

 

but what I know

 

 

 

[danco_]

2 minutes ago, conkitchen said:

1) Machined off the concentric ring of the hub. 

2) Re-drilled and tapped new bolt holes and pattern for this wheel. 

3) Added a ground wire for the horn button

4) Re-used the horn contact from the stock wheel 

5) lil custom touches like the roundel and horn ring spun finish.  

 

but what do I know

Fixed that last line for you

Edited January 19, 2023 by danco_