Front Suspension ?

[rcf925]

I'm starting to put back together front suspension on my 68. I'm missing bolt spacers, One long, One short that attach wishbone to sub-frame, Long one goes in sub-frame, Short one is in between subframe and wishbone. Does anybody know where and can get these for both sides?

[iinca]

which parts exactly in this diagram?

[rcf925]

#10 and #5

[rcf925]

Actually # 10 for sure and there is a short bushing between  #4 and #5 there not showing  . It's in my service manual

[Hans]

I don't recall anything between 4 and 5, but maybe my car didn't have one. You might be able to fabricate 10 from pipe.

[pato2002]

The other piece is on diagram 31/1, part #11. Both are NLA but can be fabricated. Mine are installed but maybe someone has some loose and can take some measurements. They should be 16-17mm ID.

Pipe: 31122614106

Shim: 31122614109

 

['76mintgrün'02]

16 hours ago, rcf925 said:

I'm missing bolt spacers, One long, One short

 

this makes it sound like the OP has examples on hand already, which would make fabricating them easier.

 

a post in the parts wanted section might prove fruitful.

[rcf925]

So after going through my hoard again I found the spacers I'm looking for stuck to one of my spare subframes. Thx for everyone's help, I been trying to sort all this stuff out over last couple months