Jump to content

cowlum

Solex
 View Profile  See their activity

  • Posts

    196

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by cowlum

  1. cowlum
    New Zealand. I am an Aucklander
  2. cowlum
    Just today I picked up two M10 engines. A 316 and a 318 engine. I plan to rebuild the 318 and takes parts and experiment on the 316. I plan to swap the 318 into my 02 so I can then rebuild the 02 M10 slowly and thoroughly with my learnt skills form the 318. This way my 02 is never dead weight for more than a week Can anyone recommend good books and/or websites for rebuild engines? What new parts a mandatory in your opinion? Any advice for a begginer is very welcome!
  3. cowlum
    I just bought a 316 engine for $20 ($10us). The cam is the same part number as that from the 318. Can I use this cam in my 02 engine? I assume the only diference is it is designed to spin the dizzy in the oposite direction. This does not bother me because I have EDIS wasted Spark. Will this work?
  4. cowlum
    I got some low impedance injectors from a volvo turbo but i never ran with them. You can run these injectors with software settings or resistors. I bought the resistors but then decided before I embark on a turbo project I will spend atleast one summer using rather then building he car. Obviously this is not 02 unique. Have a search through www.msefi.com . This forum should provide all the details you need. I prefer the idea of using resitors. That way when things go wrong the problem is tangable. ie. the resistors is burnt.
  5. cowlum
    Makes you wonder if the BMW reserch guys have been browsing this forum for some time..
  6. cowlum
    Your mystery oil probably ended up in the exhaust where it starts to smoke when the exhaust gets hot. Just run it for some time. I ran oil through the cylinders on my car when it had sat for quite some time. The oil took a LONG time to completetly burn from the exhaust. Have you ever spilt a tiny bit of oil on the exhaust manifold. lots of smoke for quite some time. symtoms were: no smoke when the car was cold. Plenty (as in street engulfing) when the car warms up. good luck
  7. cowlum
    It really does sound like your fuel pump is not producing enough pressure... Have you installed megalogviewer onto your laptop so you can view any strange occurances such as temprature spikes due to radio interferecne. What did you change before it started to fail?
  8. cowlum
    Overhauling the brakes is probably a good idea when your car is this old. I opted for the big brake conversion which made things a tab more complicated but im happy with the results. You my find you just need new brake hoses. Sometimes the hoses swell and trap the fluid in the caliper affectively leaving the brake on. And the pressure problem may just require a bleed. I usualy (budget allowing) use failures (poor brakes, bad dizzy etc) as an oportunity to upgrade. but i think you will find hoses and bleeding will cure your problems, you would need to replace hoses and fluid no matter which option you take.
  9. cowlum
    How have you guys done it? I tried glue but one medium wack with the hammer seperated it. I used alraldite (sp?) epoxy. Now im thinking of tacking it in place with the mig I did a quick search but bought up nothing any suggestions?
  10. cowlum
    well the 36-1 wheel is centred as true as my eye can tell (when I crank the engine it spins perfectly. I just doubt the weight have ended up as perfect as it looks.
  11. cowlum
    Hey Guys I have just glued my ford excort trigger wheel to my spare M10 pulley. Although I am very happy with the job I have done I cant help but think that the pulley ay be unbalanced. How many of you who have done the megasquirt 36-1 pulley had there pulley balanced? How many have not? Does it really matter?
  12. cowlum
    Not for me thanks.. Looks too heavy and fat. Im getting tired of the half SUV half car things. Jack of all trades master of none.
  13. cowlum
    Yep, somethings in the exhaust. My engine had sat for sometime so I ran fluids through it many many times before turning it over. Some of the fluids ended up inthe exhaust. it would smoke liek crazy once it had warmed up. A few days later it was fine.
  14. cowlum
    Hey Guys I have a new centre link to replace the existing one on the car (part 8 in attached). I cant seemt o get the old one out. I have belted the joins (not on the ball joints but the steel casing) over and over and over but cant seem to free the link. Any tips/tricks would be GREATLY appreciated.
  15. cowlum
    I agree with Seth, stuck float in the carb. I had a similar issue once. Easy fix!
  16. cowlum
    Hey Its been a while but I purchased MSII V3.0 board stimulater (is a MUST) relay board (optional but recomended) db37 cable If you search the internet you should also be able to find spreadsheets full of bosch injector flow rates. I found some 216cc/h@3bar injectors in an old puegot that I ended up using inplace of the original 318 bmw ones. thats about 20% larger than the original bmw ones, which helps because the 2002 engine is about 10% larger.. We could really use a bmw m10 megasquirt cook book FAQ article considering how many 02 guys attempt this conversion. I really enjoyed it when I went through it. infact im collecting parts for my next step (EDIS, wideband, megaview) Callum
  17. cowlum
    I was reading through this great thread http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,43986/highlight,530+starter/ after doing a search for the 530 starter upgrade which i stumbled on elswhere.. I then logged onto realoem.com and looked up part numbers.. I found these matching parts. (there are probably more but im working) 2002 12411269696 e28 2.5 12411269696 e28 528 12411269696 e23 2.8 e12 530 12411272150 e28 533 12411272150 e28 535 12411272150 e23 730 12411272150 e23 745 12411272150 M3 Starter 12411312130 e21 320i (m10) 12411312130 e21 320 (m10) 12411312130 Can anyone verify this? will any m30 starter then fit the m10? could it be that simple?
  18. cowlum
    Hey Tomorrowcalling You dont live to far away from me. Are you part of any clubs here in NZ.. Now thar my 02 is less shit im looking to goto some events. (edit. sorry did not mean to thread hijack)
  19. cowlum
    http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/BMW/Interior/auction-108573520.htm?p=1
  20. cowlum
    I currently have the same setup as Zenon. But now im looking to go EDIS wasted spark so I need the 36-1 wheel.
  21. cowlum
    and look for a better car to actually restore. this one is too far gone.
  22. cowlum
    Im not getting a reply from we either of these companies. Does anyone have any suggestions of a good place to order trigger wheels from. Im not really interested in dealing with companies that are slack, esp when I live Down-Under.
  23. cowlum
    Hey Bill Have you had a chance to look into shipping costs?
  24. cowlum
    Hi Do you deliver to NZ? what would be the cost in NZD + shiping to Auckland cowlum@@xtra.co.nz thanks
  25. cowlum
    Could you tell em about what type of pads I need to ask for to reduce the grip of the rear brakes? Or point me to a resource for where brake ratings/pad materials are explained in detail? As a hair brained scheme I was thinking of installing a brake pressure regulator from a 318 or 320 or any other euro I find at the wreckers. http://www.realoem.com/bmw/showparts.do?model=1812&mospid=47171&btnr=34_0096&hg=34&fg=15 http://www.realoem.com/bmw/showparts.do?model=1381&mospid=47271&btnr=34_0154&hg=34&fg=15 A regulater allows a certain amount of pressure to the rears then cuts off the supply forcing all higher pressure to the front.
×
×
  • Create New...