granth

Pusher Fan

8 posts in this topic Last Reply

Recommended Posts

What size of electric pusher fan works best with the new IE AL radaitor? I assume you could mount the fan on a couple of bar's that run side to side in front of the radiator?

Share this post


Link to post
Share on other sites

I found that the air conditioning pusher fan out of an

early '80's Mazda 323 works great-

it already has the bars, so you drill four holes and

voila- instant fan. It's small- but big enough on the 320 rad,

so I'd expect it's plenty for the bigger all- alu one.

And it weighs only about 3 lbs.

t

Share this post


Link to post
Share on other sites

1200cfm works fine with my brass 320i radiator, so I would bet you'd need even less for the IE radiator. I mounted my fan with little ziptie-like things that just go thru the fins and attach to anchors on the other side, those came with the fan from Jeg's.

Share this post


Link to post
Share on other sites

he makes a SPAL fan with those two bars attached. Makes a nice mounting system.

30130011 Bracket

pusher

30101505 medium

PMW

Share this post


Link to post
Share on other sites

permacool 12" pusher

PRM-19008

also running a Spal programmable controler

Share this post


Link to post
Share on other sites

Thanks for all the good info on pushers fans, I should be able to make something work....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now