Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Drilling for belt line trim???


BLUNT

Recommended Posts

i tried searching but nothing useful. anyone have the dimensions or a chart of sorts telling correct placement of the holes for the entire beltline trim?

i need to give it to my body guy soon

www.BluntTech.com
FAQ Supporting Vendor
 Sales@BluntTech.com

Link to comment
Share on other sites

Guest Anonymous

It seems like the McCartney book on 02 restoration has some templates for things like that way in the back...but I don't have it in front of me right now.

Link to comment
Share on other sites

  • 13 years later...

I'd seriously question drilling panels like the hood and trunk, unless you live in a dry state. 

Some of the stick on stuff is surprisingly good, also not all of BMW's trim pieces fit well now, the corner piece on my hood new from BMW is a poor fit.

Link to comment
Share on other sites

Steve,

My trim is off the car. I suppose I could make some kind of template for you, but I'm not where the car is and won't be for another month. I also installed new fenders, so I would hope those holes are properly placed. 

 

Drilling new holes for the trim would make me extremely nervous. My body guy covered my mirror hole and I'm nervous about drilling that!

1974 2002 Tii-SOLD

1978 911SC Coupe

1988 Landcruiser

2020 M2 CS

Link to comment
Share on other sites

On 3/16/2019 at 6:01 PM, West Palm 2002 said:

Too bad these jpgs can’t be

retrived 

 

 

C.D. had posted images from the blue-binder shop manual - you can find it here:

 https://www.bmw2002faq.com/articles.html/technical-articles/history-and-reference/bmw-2002-service-repair-manual-r247/

Edited by John_in_VA
  • Like 1

John in VA

'74 tii "Juanita"  '85 535i "Goldie"  '86 535i "M-POSSTR"  

'03 530i "Titan"  '06 330ci "ZHPY"

bmw_spin.gif

Link to comment
Share on other sites

I don't have trim on my car right now with the original holes everywhere.  I suppose I could get a big sheet of paper and make a rubbing if someone needed it.  The car is a '76 from CA if it makes any difference...  Or just take measurements...

Dave.

'76, totally stock. Completely.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...