Twist in Fastener identification/replacement option needed

[Dionk]

Happy Easter to those who are celebrating.

the particle board that was holding up my dome light was sagging as most of fasteners were broken or had pulled through the particle board.

I flipped the particle board over and riveted the light and wire holding clips.

 

next I plan to redrill holes for those black screw in clips.

 

1. no sure what these are called so I have been a hard time searching for them?

 

2. anyone have a recommendation on a replacement option?

[AustrianVespaGuy]

I *think* I've had luck getting some of these that are 'close enough to work fine' in a little package at autozone, but make sure to bring one with you for close comparison.  Can't remember which American or Japanese OEM to tell you to look for, but with some close inspection I think you're highly likely to find something workable!

[Mike Self]

The clips you pictured look suspiciously like those that hold the door panels in place.  The original ones were either black or white, while the new ones you get these days appear to be green.  Regardless, they're the same, and should work.

 

mike

[rms_sandiego]

You can try BMW P/N 51411870718

 

Its a door panel clip (BMW calls them clamps), but looks like it'll fit