Buying Campagnolo Rims On Ebay: It Pays To Ask

[Mike Di Gregorio]

Hi, thanks for your interest.

These are diameter of 54mm and fit on a Campagnolo wheels

The price for a set of 4 Campagnolo centers is of Euro 90 plus 15 euro shipping to U.K.

You can also purchase on our website

 

http://alfagiulia.altervista.org/C54.php?lan=eng

Let me know if you have more questions

[Mike Di Gregorio]

http://alfagiulia.altervista.org/C54.php?lan=eng

[02Anders]

45 minutes ago, Mike Di Gregorio said:

Hi, thanks for your interest.

These are diameter of 54mm and fit on a Campagnolo wheels

The price for a set of 4 Campagnolo centers is of Euro 90 plus 15 euro shipping to U.K.

You can also purchase on our website

 

http://alfagiulia.altervista.org/C54.php?lan=eng

Let me know if you have more questions

 

Thx Mike!
I'll definitely have a look at that, as I'll probably hand in my Campag's for a pro refurb during this spring...

[NickVyse]

On 2/1/2017 at 9:18 AM, Mike Di Gregorio said:

 

First time I've seen that style mounted on an 02 - are they the 4x100 set just discussed on FB with myself and Guido? Look great, quite a bit of offset. There's a guy doing centre caps in Italy too, but they're aluminium with the logo printed on them, no where near as nice as these. 

[Conserv]

16 hours ago, NickVyse said:

 

First time I've seen that style mounted on an 02 - are they the 4x100 set just discussed on FB with myself and Guido? Look great, quite a bit of offset. There's a guy doing centre caps in Italy too, but they're aluminium with the logo printed on them, no where near as nice as these. 

 

This style is not shown, with a 4x100 PCD, in the History of Wheels page for Campagnolo:

 

http://www.histowheels.com/Campagnolo/

 

There are, however, some models missing from this source.  On the other hand, this style is shown in quite a few 4x98 sizes, for Alfa Alfettas, for example.  I'm not dismissing the possibility the Golf '02 wears from-the-factory 4x100 versions, but I'm also not dismissing the possibility that the Golf '02 is wearing either 4x98 rims or, less likely, 4x98 rims re-drilled to 4x100.  (I wouldn't be shocked to find out the Golf '02 is wearing 6x14, model 40767/BP, rims.)

 

Regards,

 

Steve

 

Edited February 15, 2017 by Conserv

[Tsingtao_1903]

On 2/13/2017 at 2:33 PM, Mike Di Gregorio said:

These are diameter of 54mm and fit on a Campagnolo wheels

I measured mine.  They are 56mm.  Do you offer the 56mm version?  

 

Thanks,

 

 

Trieu

[NickVyse]

6 hours ago, Conserv said:

 

This style is not shown, with a 4x100 PCD, in the History of Wheels page for Campagnolo:

 

http://www.histowheels.com/Campagnolo/

 

There are, however, some models missing from this source.  On the other hand, this style is shown in quite a few 4x98 sizes, for Alfa Alfettas, for example.  I'm not dismissing the possibility the Golf '02 wears from-the-factory 4x100 versions, but I'm also not dismissing the possibility that the Golf '02 is wearing either 4x98 rims or, less likely, 4x98 rims re-drilled to 4x100.  (I wouldn't be shocked to find out the Golf '02 is wearing 6x14, model 40767/BP, rims.)

 

Regards,

 

Steve

 

 

yeah, there was a lot of doubt on the FB thread, but I dug out another campag brochure from back in the day that shows this style available as 4x100 for an Opel Commodore. 

[NickVyse]

here you go, my mistake, opel rekord

 

[Conserv]

12 minutes ago, NickVyse said:

here you go, my mistake, opel rekord

 

 

Yep!  Thanks, Nick.  And 6x14.

 

(I guess I should have checked the 1979 Campagnolo folder first; it's mine. ?)

 

Best regards,

 

Steve

 

 

Edited February 15, 2017 by Conserv

[NickVyse]

It's probably yours then - found it on the FAQ when the discussion about these wheels came up on FB and I had a vague memory of it. 

[Tsingtao_1903]

On 4/27/2014 at 4:07 PM, Conserv said:

 

 

Have you seen yet more styles of Campagnolo center caps?

I am still counting my lucky stars.  Just came across a set:  56mm, brass alloy, raised letterings, enamel/paint, Campagnolo blue, italian flag stripes.   

 

 

 

[zinz]

Dammmmmmm... talk about unobtainium!!!!

 

very nice!!

 

Ed

[ray_]

Your 3D printer skills have come a long way! 

 

[Conserv]

2 hours ago, Tsingtao_1903 said:

I am still counting my lucky stars.  Just came across a set:  56mm, brass alloy, raised letterings, enamel/paint, Campagnolo blue, italian flag stripes.   

 

 

 

 

Wow: they are gorgeous! Congrats on a great find!

 

Best regards,

 

Steve

 

[Tsingtao_1903]

1 hour ago, ray_ said:

Your 3D printer skills have come a long way! 

Not there yet.  Only got this far.