Jump to content

Hans

Solex
 View Profile  See their activity

  • Posts

    3,061

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    0%

 Content Type 

Everything posted by Hans

  1. Hans
    plastic tubing.
  2. Hans
    A light but firm tap just to break the initial seal. Be VERY careful not to let the treads touch the crank surface. Plastic tubing works nicely
  3. Hans
    What size tires? How about tire to strut tower?
  4. Hans
    I just taped over the holes and put a couple or old floor mats on the side
  5. Hans
    Another good idea - pickup clogged solid. But i suspect some serious problem caused it to be parked. As above why do you think gasket is bad?
  6. Hans
    If you insist on turning over more, pour oil over cam and rockers and somthing into plug holes. Just a little
  7. Hans
    Boy, I just cringe at the thought or turning it over so long with no oil pressure. Hard on crank and cam.
  8. Hans
    Again Ring Ideal Line.pdf
  9. Hans
    We taught that there are two early apexes and the rest are late by varying amounts. It appears you are turning are turning in early in some places and then having to correct. But the video makes it hard to guage distances. You seem to know the track well enough. Let me know pdf opens Ns Ring Ideal Line.pdf
  10. Hans
    I first went in 1983 and went 24 times as a student., coach, and eventually as organizer for US group. The fun-polizei eventually ended that. Wonderful times.
  11. Hans
    I'm fine with the c-clamp. I'm thinking about applying even contact on the bolt hole edge with a 3/8 square hole.
  12. Hans
    So the square hole was smaller than the bolt hole?
  13. Hans
    There are some fussy c-rings. Did they get on? Generally those cvs last a long time.
  14. Hans
    So noise started after you rebuilt? doing your own was not a mistake. Not brain surgery. You could revisit your work, or buy one new one, try one of our supporter - blunt, Rogerstii, maybe ireland
  15. Hans
    I thought the dimple around the hole (so to speak) would bulge upward in your photo. If so, and assuming you are using the solid end of the socket, how does the square drive hole contact the bolt hole? What's in the duct tape? And C- clamp will move it?
  16. Hans
    So the bolt is pulling it flat? Can I do that in a vice I wonder.
  17. Hans
    They only wholesale? So I'm looking for paper?
  18. Hans
    Thanks all. So do the peening with the pan sitting on the lip and the flange 1/ 8" inch off the bench top?
  19. Hans
    Must have been a shock to be reminded by FAQ. How old were you?
  20. Hans
    Thanks. If the pan is in same position as installed, isnt it sitting on the lip on the flange?
  21. Hans
  22. Hans
    Which nuts do you use for alloy?
  23. Hans
  24. Hans
    I thought this was E21 but now I'm not sure.
  25. Hans
    I've been using 70, so I guess I'll Stay there. Tnought I had seen 80 mentioned. Thanks. I did once see my utility trailer in the side mirror trying to pass while driving in snow.
×
×
  • Create New...