Becker Radio in Frigidair Console

[JohnC]

Will a Becker Europa II fit in a Frigidair Console? It's 7"wide, 5.75" deep and 1.75" high.

See pics below

[esty]

it should

[Mike Self]

make your cut so that the radio will clear the evaporator housing. It's parallel to the ground, while the console's face plate (where you mount the radio) is slightly angled. Thus the radio angles downward from its mounting point in the console, and has to clear the evaporator housing at the back of the radio cabinet.

cheers

mike

[JohnC]

make your cut so that the radio will clear the evaporator housing. It's parallel to the ground, while the console's face plate (where you mount the radio) is slightly angled. Thus the radio angles downward from its mounting point in the console, and has to clear the evaporator housing at the back of the radio cabinet.

Thanks, I'm terrified to mess up the original console cover, so I bought a used one with a radio cutout already, so I've got some wiggle room to make mistakes!

[robspeed]

by the way its Frigi-King, not frigidaire...