Oil pressure sender M10

[AustrianVespaGuy]

Where do you find oil filters that are made in Austria?!? I need this. . .!

1 hour ago, jp5Touring said:

 

[John76]

5 hours ago, jp5Touring said:

I have Speedhut gauges.

Did the connector on the oil pressure sender come with the Speedhut gauge?

Also spotted one on the oil temp sensor. Looks like they might even be waterproof.... very cool! 

John

 

 

[jp5Touring]

1 hour ago, AustrianVespaGuy said:

Where do you find oil filters that are made in Austria?!? I need this. . .!

 

 

Mahle  OC84.  It was either Bluntech or Ireland.   I'll have to look at my receipts.

According to the InterWeb their more crush proof when engine oil is cold.

So far so good. Not that I've ever had any problem with that.  

[jp5Touring]

7 minutes ago, John76 said:

Did the connector on the oil pressure sender come with the Speedhut gauge?

Also spotted one on the oil temp sensor. Looks like they might even be waterproof.... very cool! 

John

 

 

Yes, Speedhut gauges were very complete and very nice quality.

Not cheap but would buy again for sure. 

You can customize the faces however you want.

I did the faces and needles as close to factory as I could.

 

 

 

[jimk]

3 hours ago, John76 said:

Looks like they might even be waterproof.... very cool! 

Commonly used on GM wiring from the late 80s and 90s.  They are keyed for the sensor.  Need the correct one for the sensor.

Edited August 5, 2022 by jimk

[chargin]

On 8/4/2022 at 9:18 AM, jp5Touring said:

I just used an adaptor so  both work. I have Speedhut gauges.

My Brother ?

 

Speedhut

 

Hex oil pressure adapter