Rear and front Bumper's from Dtech

[esty]

2 hours ago, Labphoto said:

BluntTech Industries • 2002 FRONT BUMPER CONVERSION BRACKETS

WWW.BLUNTTECH.COM

---

Our front 2002 bumper conversion kit provides a bolt on solution to mount early style bumpers to your square light car...

 

original poster, you might want to check with blunt but as far as i'm aware, mounting small bumper in the original big bumper holes, raises it too high...i did that originally and had to lower the brackets to the original height

[Labphoto]

29 minutes ago, esty said:

original poster, you might want to check with blunt but as far as i'm aware, mounting small bumper in the original big bumper holes, raises it too high...i did that originally and had to lower the brackets to the original height

Mine  is perfect 

[Mark92131]

1 hour ago, Labphoto said:

Mine  is perfect 

 

That PastelBlau paint looks perfect, the bumpers look good too!

 

Mark92131

[Karlosism]

Not straight forward but got the rear done. ?

For the front bumper, I might drop it off to a local Bodyshop/mechanic to do it correctly as everyone noted on prior posts. 

Thank you everyone. 

[Mario Falfan]

I went on the easy route and took the car to the body shop, and I was very happy with the end result !

[Karlosism]

5 hours ago, Mario Falfan said:

I went on the easy route and took the car to the body shop, and I was very happy with the end result !

Wow, that looks GREAT! Is the front bumper higher than normal and more tucked in? Any pictures from a lower angle and side? 

Thanks!

[chargin]

That super slick Blunt Tech kits wasn't available 6 years ago so I went Old School

 

If I did it again I wouldn't hesitate to buy that kit 

 

 

 

 

 

 

 

I did redo the muffler next 

 

 

 

 

[Mario Falfan]

Yes I had to cut the muffler pipe as  well, as it was longer and it stuck out …..

[Mario Falfan]

I purchased the mounting kit from Bluntech and it worked like a a charm …..