body and interior Ideas For Easy/cheap Way To Fill In Holes Left By Front Bumper

[cosm3os]

The two big rectangles where the supports went through the body.  I'm not doing metal work anytime soon.  Anyone have a bright idea (big rubber gromet would be nice).

[M3M3]

body colored duct tape......

[esty]

quick and dirty fix

 

 

go to lowe's or home depot, buy some plastic hole plugs...paint with model paint

[cosm3os]

I'm doing the hole plugs for the bolt and screw holes. I'm talking about the two big holes left by the big bumpers.

I was thinking duct tape but how about painted aluminum tape?!

[esty]

I was thinking duct tape but how about painted aluminum tape?!

 

if you can epoxy some stiffer metal behind the holes, for support, under the fenders, the foil tape should work

[hchueh]

Get leftover piece of 3-4mm plastic, put behind hole, trace perimeter then dremel down a rim around the trace, same as thickness of bumper, glue in!

[M3M3]

pretend it is a fancy air intake by putting door molding edge around the hole and fixing some black painted chicken wire behind the holes...

[xferboy]

or expanded mesh for rain gutters

 

http://www.homedepot.com/p/Amerimax-Home-Products-6-in-x-36-in-Hinged-Gutter-Guard-Unpainted-85280BX/100002884?N=ar5e#

 

result:

http://i727.photobucket.com/albums/ww278/monza2t/P1060183.jpg

rattle can as desired.

 

works great on fiberglass circle track cars on the grills to keep out some of the rubber.  Little tuner-ish

 

I like the edge molding.

[TobyB]

"conduit plugs"- the flat metal things you use to fill a hole in an electrical service box that you're not using anymore.

They're round, and even have toggles on the back to hold them in place.

 

Then you can paint yellow smiley faces on them.  Or daisies...

 

Might have to go to an electrical supply place for ones that are big enough.

 

t

[182kartracer]

use it to mount fog lamps through it and use the fog lamps to cover the holes

[Cyclone101]

How big are those 'Respect your Elders' stickers?

[cosm3os]

use it to mount fog lamps through it and use the fog lamps to cover the holes

 

Does anyone make mounts for that location?  I don't feel like fabbing myself.

[Cru Jones]

On mine I cut some small plates and color matched them and bolted them into the holes. Looks ok, but I've prefer to have some better way of doing it. You can sorta see it in the below.