engine and drivetrain Kugelfischer Pump Cones

[kbmb02]

Sort-of on topic ... cut-away of kugelfischer.

 

[NickVyse]

BTW, here's a link to Lucas Developments in the UK that was mentioned earlier. And how good does this sound?

 

"However for the correct match to your engine fuel demand we recommend running with our closed loop control pump in order to generate a bespoke cam profile. "

 

 

http://www.lucasdevelopment.co.uk/Products.html

[cda951]

I am driving a Tii with dBilas ITB, had the M16 made for the injectors. I used the dBilas manifold as the Ti manifold will make the ITB touch the pump. The ITB´s have external inlet after the throttle (cylinder head side) and I use those inlets for injecting cold start and extra air on cold start. I am running it with a Schrick 284 and an original pump. The car is quite fast.

 

The only thing I need now is an Alpina-like airbox, dopes anybody know one?

 

 

 

 

Awesome, thanks for sharing! This is now on my wish list, as an original Alpina A4 setup is stupidly expensive and hard to find.

 

Where did you get the fuel injection lines?

[remcoseegers]

Awesome, thanks for sharing! This is now on my wish list, as an original Alpina A4 setup is stupidly expensive and hard to find.

 

Where did you get the fuel injection lines?

 

I got them from here: http://www.shop-fordv6.de/de/kugelfischer-einspritzung-mechanisch/734-rs-2600-einspritzleitungssatz-6-tlg.html

 

Be aware that these wil go for the Alpina A4 setup but in my case some corrections were requiered as the injector for a A4 and for my dBilas are not exactly located on the same place.

 

If you go for a dBilas setup like I did, tell the man to make them correct. I have some pics somewhere of the corrections that were needed.

 

But it does look quite nice yes :-)

Edited February 1, 2015 by remcoseegers

[Swiftus]

Has anyone mapped a cone yet? I now have access to all of the tools necessary to map one. Producing a CAD file after measuring it will be trivial afterwards.