Jump to content

Dionk

Solex
  • Posts

    941
  • Joined

  • Last visited

  • Feedback

    93%

Everything posted by Dionk

  1. Strut braces are dropped from list. I was tentative on thm anyway. Thank you for the "dot education" much appreciated.
  2. Thanks John - ill look into what steering parts may need replacing. I picked up a used rear subframe (powder coated black) from coupeking. At least I ordered it last night anyway.
  3. How many spring pads would I need - 4 or 8? Sent from my iPhone using Tapatalk
  4. All brakes, brake parts (rotors and drums) and lines are new! That was second big project getting a running engine and trans in the car was the first. Agree on the upper strut mounts and spring pads - good catch. Ty Sent from my iPhone using Tapatalk
  5. A suspension overhaul is my next big project. I considered a rebuilt head and cam but the engine is running fine so ground contact and feel is next. Have had great luck working with the guys up at Bluntech - hopefully "moby" will make it to vintage this year so I can meet them. I digress....Thinking of buying all that's pictured here and a new rear subframe (mine has a rust hole) as well. What am I missing that should also be considered? Thanks Dion Sent from my iPhone using Tapatalk
  6. Shall I remove the air filter Sent from my iPhone using Tapatalk
  7. Pics of my carb Sent from my iPhone using Tapatalk
  8. [attachment=172687:IMG_9660.JPG Moby Sent from my iPhone using Tapatalk
  9. My car starts up very slowly after turning over the engine several times it finally kicks over and then with some coaxing the gas pedal I'm able to get it running. I've noticed that my choke wire is not connected to my weber 3236 carburetor since this is the first 2002 I have ever owned not sure exactly where the Cable is supposed to connect to. Can anyone take send me a picture of where the choke cable connects to the carburetor thank you. also for reference once the car is warmed up and running after about 15 minutes the car will start up how with just at the slightest turn of the key so it's not a problem in the car engine is warm thanks newbie here looking for some help Sent from my iPhone using Tapatalk
  10. +1. Just replaced mine. Tried to blow air through one and it was completely blocked.
  11. PM sent Sent from my iPhone using Tapatalk
  12. My 71 only has the drivers side mirror.
  13. Found a set of Mazda protege seats...price is low....seats look decent. As soon as the snow lets up I'm going to buy them and report back on install. best dion
  14. I need these - 1000 is steep so.... overhauling my suspension is the next big thing I need to spend on. If these are still available in June time frame let me know.
  15. Just replaced front calipers, pads, rotors land brake ines. price reduced. 4900
  16. Stop gap solution needed. My drivers seat is literally disintegrating and the only thing separating my butt from seat springs/wires is cardboard, an IKEA pillow and a vintage lamb skin seat cover. in my E30(daily driver) I swapped my mint passenger seat into the drivers side as the bolsters and internal hardware were broken. This actual worked well even though It makes seat position adjustments awkward. However once It's adjusted your fine. Question: can the early 02 seats be swapped from passenger side to driver side? If so, this is happening tomorrow! thanks dion
  17. Same- believe I have one in mint condition.
  18. I had to switch to Tapatalk to access general discussion. Sent from my iPad using Tapatalk
  19. One of my calipers seized and I'm debating rebuilding or buying rebuilt - prices seem about the same all said and done Sent from my iPhone using Tapatalk
  20. John there is a set for sale on eBay that I have been watching. Sent from my iPhone using Tapatalk
×
×
  • Create New...