Jump to content

bimmerwork

Solex
 View Profile  See their activity

  • Posts

    97

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by bimmerwork

  1. bimmerwork
    BRANDON, HAVE YOU SOLD THE KLIPPAN SEAT BELT ? THANKS, WILL
  2. bimmerwork
    HAVE YOU SOLD THE KLIPPAN CHROME SEAT BELT RECEIVER ? THANKS, WILL
  3. bimmerwork
    I STILL NEED ONE PANASPORT CENTER CAP, FOR 60MM HOLE, BLACK PLASTIC, BLUE EMBLEM WITH CHROME "PANASPORT" LOGO. WILL TAKE MORE THAN ONE IF SELLER REQUIRES. ( FOR CLASSIC PANASPORT 13" WHEELS )
  4. bimmerwork
    I STILL NEED ONE PANASPORT CENTER CAP, FOR 60MM HOLE, BLACK PLASTIC, BLUE EMBLEM WITH CHROME "PANASPORT" LOGO. WILL TAKE MORE THAN ONE IF SELLER REQUIRES. ( FOR CLASSIC PANASPORT 13" WHEELS )
  5. bimmerwork
    I NEED A PART FOR AN E30 SPORT SEAT...THE FIBER SHELL ON THE BACK OF THE BACKREST HAS TWO CLIPS AT THE TOP THAT HOOK ONTO THE SEAT FRAME. I ONLY NEED THE BLACK STEEL PART THAT SNAPS INTO THE BRACKET THAT IS BONDED TO THE FIBER SHELL. I WILL TAKE THE WHOLE SHELL IF NECESSARY AND DON'T CARE ABOUT THE CONDITION OF THE REST OF THE SHELL. THANKS, WILL
  6. bimmerwork
    Has anyone had success installing E30 sport seats in a 2002 ? How was it done ?
  7. bimmerwork
    I NEED ONE PANASPORT CENTER CAP BUT WILL TAKE MORE TO SEAL THE DEAL. THE CENTER CAP I NEED FITS A 60 MM OPENING, IS BLACK PLASTIC WITH A BRIGHT BLUE EMBLEM SHOWING A CHROME LOGO. THE WHEELS ARE 13" "MINILITE" STYLE.
  8. bimmerwork
    I HAVE ONE IN GREAT CONDITION WITH 99K ON IT. BUT... IT IS IN NORTH CAROLINA. I AM DRIVING TO SAN DIEGO RIGHT AFTER LABOR DAY AND COULD BRING THE DIFF. WITH ME. THE DIFF. IS FROM A '68 '02 REPLACED WITH A SHORTNECK 391 DIFF. HAVE NICE SUBFRAME ALSO.
  9. bimmerwork

    I HAVE ONE ONE OF THE FABRICATED STEEL BRACKETS FROM A BEHR SYSTEM AND THE COMPRESSOR FROM A '75 2002...WAS WORKING WHEN REMOVED.  I'M OPEN TO SELLING THE BRACKET ONLY. I ALSO HAVE 2 OR 3 BEHR FANS, SOME MISC. FAN BRACKETS, ONE EVAPORATOR COIL, AND SEVERAL BEHR CONSOLE SIDE PANELS AVAILABLE. 

    1. skyking96w

      skyking96w

      Thanks, but I found what I needed.  

  10. bimmerwork
    I'M IN NEED OF ONE OR MORE PANASPORT CENTER CAPS. THESE WERE USED FOR THE 13' CLASSIC PANASPORTS. THE CAPS FIT THE 60" HOLE AND ARE BLACK PLASTIC WITH A BLUE EMBLEM WITH A CHROME LOGO. NOT LOOKING FOR A BARGAIN, JUST REALLY NEED 1 CAP TO FINISH THE RESTORATION AND WILL TAKE MORE IF IT WILL SEAL THE DEAL. PHOTO ATTACHED... THANKS, WILL
  11. bimmerwork
    1968 2002 DIFFERENTIAL, VERY CLEAN INSIDE ( NO SLUDGE, OIL WAS CLEAR ) WHEN INSPECTED. NEEDS A NEW COVER GASKET, AND FRONT SEAL WAS DAMP. THERE IS NO WEAR EVIDENT ON THE GEARS. THE EXTERIOR HAS THE USUAL SURFACE RUST. ODO READS 99,000 MILES. I CONVERTED TO A SHORT NECK 391 DIFF. SUBFRAME ALSO AVAILABLE SEPARATELY...
  12. bimmerwork
    1968 2002 DIFFERENTIAL, VERY CLEAN INSIDE ( NO SLUDGE, OIL WAS CLEAR ) WHEN INSPECTED. NEEDS A NEW COVER GASKET, AND FRONT SEAL WAS DAMP. THERE IS NO WEAR EVIDENT ON THE GEARS. THE EXTERIOR HAS THE USUAL SURFACE RUST. ODO READS 99,000 MILES. I CONVERTED TO A SHORT NECK 391 DIFF. SUBFRAME ALSO AVAILABLE SEPARATELY...
  13. bimmerwork
    HEY MATT, I'M INTERESTED IN THE HAND HOLD STRAPS , HOW MUCH, AND ARE THEY NICE ENOUGH FOR A PRO RESTORATION ? THX, WILL
  14. bimmerwork
    HEY RICH, QUITE A PILE YOU HAVE THERE. I'M INTERESTED IN TWO VENT WINDOW KNOBS & BLACK ARMRESTS SUITABLE FOR A PRO RESTORATION, AND THE RIGHT SIDE TAIL LIGHT COVER ( FITS INSIDE TO COVER THE ELECTRICAL CONNECTIONS ). I COULDN'T TELL FROM THE PICS, WOULD YOU HAVE A NICE SET OF REAR SEAT BELTS ? THX, WILL
  15. bimmerwork
    HOW ABOUT A FRONT SET ? AND HOW ABOUT BLACK ARMRESTS SUITABLE FOR A COMPLETE RESTORATION ??? THX, WILL
  16. bimmerwork
    HAVE YOU SOLD THE SEAT BELTS YET ? WILL...
  17. bimmerwork
    BEAUTIFUL SOLUTION !!! LET ME KNOW WHEN YOU ARE READY TO SHIP AGAIN... I'LL. WAIT ! THX WILL A.
  18. bimmerwork
    I NEED THE TINY SPRING CLIP THAT GOES JUST BELOW THE BIG WASHER THAT THAT CONTACTS THE TOP RUBBER MOUNT. SO I NEED THE SHOCK JUST FOR THAT CLIP AND DON'T CARE ABOUT THE CONDITION OF THE REST OF THE SHOCK. THX, WILL
  19. bimmerwork
    I HAVE A SET OF 13 X 6 VINTAGE PANASPORT WHEELS THAT I NEED CENTER CAPS FOR. EITHER A COMPLETE SET OF FOUR , OR 2 THAT ARE BLACK PLASTIC WITH A BLUE FACE WITH CHROME LOGO TO MATCH THE TWO THAT I HAVE. THANX, WILL
  20. bimmerwork
    IS ANYONE AWARE THAT EARLY W/WIPER HOLES IN THE COWL ARE OF DIFFERENT DIAMETERS THAN THAT OF LATER CARS ? THIS I DISCOVERED DURING THE IMPOSIBILE RUBBER GROMMET INSTALL... THE RUBBER GROMMETS ? FROM ROGERS Tii AND MAXIMILLIAN, THE CAR ? A VERY EARLY '68 '02. SOOO, I MEASURED THE OFFENDING HOLES IN MY CAR...12mm, ONLY SLIGHTLY LARGER THAN THE SPINDLE. I THEN MEASURED THE HOLES IN MY FRIENDS '75 PROJECT... 22mm ! HMMMMM, NO WONDER, THE GROMMETS FIT PERFECTLY IN HIS CAR ! MY QUESTION IS, SINCE THERE IS NO ROOM FOR A RUBBER GROMMET, WHAT IS THE CORRECT ASSEMBLY CONSIST OF ? I HAVE AN ASORTMENT OF HEAVY SS WASHERS, FLAT CHROME WASHERS, THE CHROME NUTS, BUT NO RUBBER COMPONENTS, OTHER THAN THE IMPOSIBLE ONES. THANKS FOR ANY ENLIGHTMENT YOU CAN PROVIDE.
  21. bimmerwork
    have you sold the fog light switch ?
  22. bimmerwork
    Brandon...i need the long linkage rod for a 2002 wiper assembly, and an early motor...cover too maybe ? if no linkage rod, how about a complete linkage assembly and an early motor ? what do you have ? Thanks, Will
  23. bimmerwork
    I'M IN NEED OF A SET OF PANASPORT CENTER CAPS...OR TWO IF THEY ARE BLACK PLASTIC WITH A BLUE FACE & CHROME LOGO... ANYONE ???
  24. bimmerwork
    HI, HAVE YOU SOLD THE WIPER ASSEMBLY ?
  25. bimmerwork
    have you sold the wiper assembly ? will...
×
×
  • Create New...