Jump to content

Hans

Solex
  • Posts

    3,059
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    0%

Everything posted by Hans

  1. Did you bleed with person pumping pedal? Does the shifter platform attach to the tunnel?
  2. What is that hose to right of booster sticker?
  3. In what order did you bleed caliper screws? Did you have the whole system apart?
  4. Does it fire at all? How did you check timing? Keep in mind that it could be seriously flooded.
  5. #1 at TDC on firing stroke. Rotor should be under #1 plug wire.
  6. Just elevate car. Air leaks? System should be full of water.
  7. Who needs Connections NYT? And how did the Halifax ferry end up in CO?
  8. Is the plastic spacer on the tank sender outlet? Fuel clamps all tight?
  9. Right, six brake and one clutch hose.
  10. If there's any chance those hoses are original, it is false economy to not change them now. Rockauto has them.
  11. Might as well replace all five hoses. But it could be caliper operation too. How old are components?
  12. Did we determine if the front pulley had a timing pin nearby? If so, mark 33 degree on pulley and have it it.
  13. Good luck getting that thing machined perfectly square. Been there, threw it out. When tightening those bolts, put the main cover on loose and push down hard on it. I'd get s thick top gasket and goop it first.
  14. It may be hard to hear pinging in some cars. Anyway, its a BMW, not a Pinto.
  15. Tell me more about the bourbon tube...
×
×
  • Create New...