I crudely measured the diamiter, and it is 65mm. Im going to have to run an adapter plate for the 320 manifold. Im not sure how it would work with a 318 manifold. My plan is to run a garrett GT2860rs aka "The Disco Potato".
Everything above.....and don't settle wait till you find the perfect car for you. What you don't want to do is get overwhelmed and give up on '02's which we have seen on the board. Good luck!
Andrew
Thank you i will keep that in mind. The other day i stripped the leather off and im going to attempt a recover myself. I'll keep you up to date on how it turns out. If it doesent i'll contact you for a new wheel more then likely.
Thanks again,
Andrew
My MOMO wheel has the leather falling off and it not only looks bad but feels bad on my hands too. Is there a place where i can get it recovered, or can i buy a kit to do this.
Thanks,
Andrew
I would buy a new rear main seal, oil pan gasket, oil pump gaskets, and crank and rod bearings. Thats all i can think of im sure others have some to add.
Andrew
I have the IE Stage 2 Springs and sawy bars, and i love them. They are mated with billy sports and soild subframe with urthane everyelse. I love the way it handles. It is rough for the street....but hey i like it rough. Go with IE a good product with even better service. Will be able to help with any questions you may have.
What would one do with a striped sparkplug hole. Any suggestions would be great. I already tried the sock trick, so thats out. Please Help. Thanks.
Andrew
Would anybody happen to have a picture of how the reinforced their driver side motormount bracket. Its the one welded to the crossmember next tho the steering box. Im replacing my crossmember, and was hopeing to see how others made theirs stronger. Thanks.
Andrew
Im setting up my car for the track. Im trying to avoid the expense of a coil over setup. Right now i have Billy's all around and ie sway bars front and rear. Im now looking for the right set of springs. Any help would be great.
Im looking for the stiffist springs i can find. So in my search i found this company. Has anybody ordered springs from them? If so what diod you order. Secondly what are the demensions of the stock 2002 springs. Any help would be great. Thanks.
Andrew