engine and drivetrain Any Megajolt users??

[bflan2001]

I've had megajolt up and running for several months now, and I need to get my tach working. I tried to figure it out on the MJ website but there's a lot of 'this might work, but it might not' information there. i'd rather not waste hours of time rewiring things to end up where i started. i figure someone, somewhere, has to have done this on an M10 before.

I'm also still running the default ignition map. Does anyone have a tuned M10 ignition map?

side note: even with the default (universal 4-cylinder) map, the engine runs smoother and stronger than it ever has, i'm extremely happy with megajolt

[bflan2001]

bump

[TobyB]

no...

[Benetton]

there's a kid around here running mj that he tuned and i think his tach works so i'll forward a link to this post to him.

[Sett]

I can't help you with your question but I will running Mega Jolt in my 02 soon with a rebuilt motor. When I get it running I may be able to help out with the tach issue. Have you checked the forum site for MJ? They have a section for users to up load maps.

Steve

[JohnC]

Are you running EDIS? If yes, email me and I'll send you a diagram.

[bflan2001]

Thanks for the replies guys!

Steve,

I searched their forums and actually posted a thread there also. I found one guy in Serbia with an E30 316 who says he just connected the MJ tach out directly to the tach in at the cluster. I will be trying this tomorrow. According to the installation instructions this won't work, but it's worth a shot if it worked for this guys E30. As far as maps go, all the M10 maps I could find were for heavily modified engines, my engine is relatively stock.

John,

Yes, the Megajolt system uses the stock EDIS components. My email address is my FAQ username at gmail. A diagram would be a big help!