Looking for 2002 brake line clips?

[frached]

Looking for the little clips that hold the rake lines together and hold the brake lines in the metal firewall clips. Pic attached. 

[Buckeye]

There are 3 types of clamps/ holders. which ones?

 

Item #10   34321107991

 

Item #8  34321102861 NLA

 

Item #12  34321107992

 

Item #13  34321102862

[jimk]

Look at those for the E30s, much better than the bendable ones.  The E30s are not metal and do not need the corrosion insulator that is in the pic above.

[AceAndrew]

Those specific clips are NLA, but you can usually score some from when someone parts out a car in the classifieds section.

 

Unfortunately the #10 clip in the first diagram is also nla.

 

you can also find retainer clips from hot rod suppliers for 3/16 Size that work great

[frached]

22 hours ago, Buckeye said:

There are 3 types of clamps/ holders. which ones?

 

Item #10   34321107991

 

Item #8  34321102861 NLA

 

Item #12  34321107992

 

Item #13  34321102862

Thank you Buckeye, number ten is the one I need. Thank you to all other answers and info. 

[AustrianVespaGuy]

I can attest that 37321107991 is readily available and works. We used these back when I was building E70/E71s and I noticed that the BMW drawing for them was dated from ~1970, and a few scrap parts eventually found a second life on my 2002! Interesting anecdote: a few E70s out there have an 'extra' one that was used  for a few weeks of production as a temporary protection against a low clearance area between one of the rear brake lines and a weld seam on the rear subframe, until the hard line bending tooling could be adjusted.

https://www.turnermotorsport.com/p-62641-34321107991-genuine-bmw-part/

[AceAndrew]

Interesting.... another ETK part update that backdated to the 2002.  Glad to see it.