Brake Master Cyl. ?

[rcf925]

These are the Calipers I am using. I was told they are Volvo but somebody more familiar might chime in and verify or tell me what they are

 

 

[Simeon]

The Volvo calipers commonly used for vented disk conversion are originally made by Girling and have 4 cylinders (pots). Could those be rear disk brakes?

 

A quick google around of the name / number on the box doesn’t reveal anything. 

[rcf925]

2 minutes ago, Simeon said:

The Volvo calipers commonly used for vented disk conversion are originally made by Girling and have 4 cylinders (pots). Could those be rear disk brakes?

 

A quick google around of the name / number on the box doesn’t reveal anything. 

There supposed to be for front, A lot of these parts were bought 10 to 15 yrs. ago, They were supposed to be legal for some type of racing my Nephew was doing at the time

[Hans]

they might be early fronts, but hard to tell scale. They look small. Does the bolt pattern line up with struts?

[TobyB]

E21 calipers.  They're what others have used on the early cars.  I raced with them for a few years- they work.

 

t

[rcf925]

27 minutes ago, TobyB said:

E21 calipers.  They're what others have used on the early cars.  I raced with them for a few years- they work.

 

t

 

 

Thank You

[Hans]

So they match the narrow bolt pattern (vs tii)? E21 master would be a good match then.

[rcf925]

I did order a E21 Master, So hopefully everything will match up

[rcf925]

Just an FYI, I received E21 Master Cylinder and it fits perfect, My three lines match up with the holes in cylinder and the the dimensions that go into brake booster are all correct so this could work out just fine, Plus it was a hell of a lot cheaper for master

[Hans]

well there you go! Another happy customer. Just keep an eye on the push rod clearance between booster and MC.