engine and drivetrain Weber 32/36 Throttle Plate

[182kartracer]

This may be a weird question to ask but what is the hole spacing on a Weber 32/36 throttle plate. Thinking of using one on a Formula SAE car but i need the hole size so i can design a new piece for it to mount to. 

[dbmw2002]

Its the same size as the bolts in the manifold, or the holes on the solex

[TobyB]

Do you mean bore spacing (the distance between centers on the barrels)

or bolt spacing (the pattern for the mounting studs)

?

 

t

[182kartracer]

the spacing between the two holes on the plate itself. Just using the primary plate not the assembly. 

[TobyB]

Oh, on the throttle plate, between the two screws that hold it to the shaft!  I'll go measure in a bit...

 

 

t

[TobyB]

Looks like 16mm, near as I can figure.  I couldn't find one torn down that far, so that's making the ASSumption that

the screw heads were concentric to the threads (they seem to be...)

 

hth, and sorry for my lack of reading ability.

t

[Pamola]

What are you up to? The intake restriction for FSAE much smaller than the 32/36 x-section area.