Upgraded door brake sets BMW 1600-2002

[hcueva]

Hi. Still have a pair of the door brake sets? Let me know.

hernancueva1@gmail.com

Sent from my iPhone using Tapatalk

[oh2ryan]

I will take a set if they're ready to ship.

 

ryanmack11@gmail.com

 

-Ryan

[oldskoul]

i need a set. 

westsidetheo@gmail.com

 

 

[harry6422]

6 sets in stock  2/27/2017

[James Mermigas]

Hi,

 

I need a set.

 

jmermigas@hotmail.com

[harry6422]

Hi James, Email set to you hotmail address.

 

Harry

[TimLuck]

FYI, I installed a set of Harry's door brakes a couple of months ago and am very happy with them.  The instructions were easy to follow and it was pretty painless overall (except removing the original pins!).

[Freude am Fahren]

How much were these when they initially came out? Do you ever do any sale runs on them?

[harry6422]

   Well I think it was about  6\2009 when I started the restoration on my 75 2002 that I started making and offering these door brake sets here, in that time the cost of parts, welders, grinders, paint , hardware , shipping and everything else  has increased, along with the value of 2002's.  I make these as a hobby, which takes time out of my retired busy life , and I  try to keep a few in stock to ship to members who need them, so I don't have dozens on hand to put on "sale". 

    For a part that works better and cost less  than the BMW factory part, modified to be a exact fit , high quality pillar mount seals, all the hardware need ,pre lubed  ready to install  and shipped free to any USA address I think $140.00 Is a great value at this time .If you need a set I only have 4 sets in stock at this time.

 

Harry

 

 

 

 

[Freude am Fahren]

3 hours ago, harry6422 said:

   Well I think it was about  6\2009 when I started the restoration on my 75 2002 that I started making and offering these door brake sets here, in that time the cost of parts, welders, grinders, paint , hardware , shipping and everything else  has increased, along with the value of 2002's.  I make these as a hobby, which takes time out of my retired busy life , and I  try to keep a few in stock to ship to members who need them, so I don't have dozens on hand to put on "sale". 

    For a part that works better and cost less  than the BMW factory part, modified to be a exact fit , high quality pillar mount seals, all the hardware need ,pre lubed  ready to install  and shipped free to any USA address I think $140.00 Is a great value at this time .If you need a set I only have 4 sets in stock at this time.

 

Harry

 

 

 

 

 

Sorry Harry, I wasn't trying to imply that they are not quality products or that they are over priced. Just wanted to give myself a metric in how much I'm missing out price wise by not pulling the trigger on these and give myself the false hope that if I wait a bit longer maybe there would be a sales run and I can take advantage is all. 

 

 

[harry6422]

No problem, sometimes I give more info than needed :), I will be making these in the future as long as there is a demand form them, if you can't pull the trigger now . Just for info I have attached a picture of the classic door brake failure door damage when the door swings forward and hits the front fender, be careful. 

 

Harry

[Snow Sandwich]

Hi Harry, I need a set as well.

 

Leew089@hotmail.com

 

Thanks

[harry6422]

Hi Lee, email sent to your hotmail.com address

[InkaTii]

I saw this breaks in eBay. When you have available. Please send me a message.

 

Juanguillermorey@gmail.com

 

Thank you.

 

[harry6422]

Hi, Email sent to your gmail.com address

 

Harry