For sale : Twin mikuni 44mm side draft carb set up

[Poon]

So I have a dual side draft set up that came off my running driving '72 2002. I've been hanging on to this with intentions to build an M10 for my '76 Mintgrun, but frankly it's never going to happen, and local Collector Plate criteria are super strict.

Anyways, I have everything in the picture that were on the car. The side drafts, filters, fuel pressure regulator, mounting manifold ect.

Just wondering if there was any interest out there?

Cheers,

Andrew

[RoccoGilroy]

40's or 44's??? If there 44's I'm interested. Wanna trade for a 3.64 LSD?

[jerry]

arghhhhhhhh!!!!!!!!!!!!!!!!!!!!!!

timing is everything.....

i JUST spent $300 on rebuild kits and a few other bits n pieces from wolfcreek racing just to try to get a set of 44's useable and i still have more money to spend.

i would have loved to have purchased your setup....

if you decide to part them out i'd be interested in the linkage, velocity stacks and filters.

i plan to use my set as training wheels then ultimately install a set of solex DDH's in their place.

[Essem.w]

I'm intersted although I've been flip flopping on the idea for a while I could be convinced. Shoot me an email when your ready.

[rctid]

I'm interested! e-mail sent but if you don't see it send me a message at r dot a dot somerville @ gmail dot com

[VonTrapp]

Interested as well, if 40's.

[susnick]

I am interested if 44,s please call or e-mail.

Thanks,

Mark

954-684-4989

Susnickaudio@bellsouth.net

[susnick]

I am interested if 44,s please call or e-mail.

Thanks,

Mark

954-684-4989

Susnickaudio@bellsouth.net

[Poon]

Ok, I took a bunch of pictures, maybe you guys can help me identify these?

The only stampings/marks I can see on the assembly (aside from the mikuni corps. stamp) is a 1/44 on the first intake runner, and 2/44 on the second intake runner. Am I correct in assuming these are 44's?

Anyways, just to clarify, they come with everything you see.

-Sidedrafts

-Intake runners

-Linkage set up

-Throttle cable set up

-FPR + fuel pump

They came off my running driving '72 2002. The car ran great , pulled hard, and sounded beastly. I don't know if it needs a "rebuild" but I would recommend a new pair of intake filters and fuel filter for good measure. They have been off the car for about 2 years, and I should also note that the car had always had a tank full of stabil in the gas, because it was not used as a daily driver.

Anyways, here are some pictures.

Note the under side of the intake runners are labelled 1/44 and 2/44

As for price, am I correct in thinking these are worth around $700 for the complete assembly or am I completely out to lunch? I know they are big $$$ to buy new, and you would also need the intake runners , plus linkage set up. I payed around $400 for my weber 38/38.

Anyways, thanks for the interest. I'm happy to answer any questions.

[Poon]

Btw, I am open to offers, I just don't really know what a complete set up is worth

[RoccoGilroy]

If your interested in a trade for the 3.64 LSD let me know. If not go ahead and go on to the next person on the list. Email me and Thanks!

What numbers Are stamped on the butterfly when you take the air cleaner off? 175 should be 44's...

[Poon]

Sorry, but I'm not looking at a straight up swap, as I need to free up some funds in order to buy the exhaust I'm after.

I just checked and it does say 175, so they are indeed 44's. Cheers.

[RoccoGilroy]

LSD + $200?

[Poon]

Sorry, but I'm looking for more cash. Maybe once your LSD sells you can make me a cash offer?

Thanks for the interest.

[Poon]

So anyone interested? Open to offers