BMW Stainless Brake Lines

[TJS]

Does someone have the website for the company that makes the prefabed brake lines? Also I have a TII brake booster and wanted the lines for the same; are the fittings the same at the brakes?

Thanks

[roadhog0]

Blunt on the forums sells them, get in contact with him.

[thaddeussmith]

Blunt on the forums sells them, get in contact with him.

just bought a set from him last week.

[M3M3]

i did not think you could get pre-bent brake lines anymore. bmw sells all the lines, but they are straight and you have to bend them to fit.

yes, end fittings are same for all 02's.

[BLUNT]

i did not think you could get pre-bent brake lines anymore. bmw sells all the lines, but they are straight and you have to bend them to fit.

yes, end fittings are same for all 02's.

Marshall is correct on BMW steel hard lines. Classictube.com has pre bent stainless lines and they are very nice. i have a set on my M2. I have braided stainless DOT approved soft lines if thats what you mean

[bluedevils]

what is the diameter (inner+outer) of these lines? I have bunch of them with copper inner lining but not sure if they will fit my tii (I think ID is 3/8 but not sure).

[///mChris]

Do you have any pictures of the stuff from classic tube? I wanted to buy a fuel line from them. They didn't have photos. I didn't feel like going on faith, so I bent my own. I always was curious about their stuff though.

[BLUNT]

Do you have any pictures of the stuff from classic tube? I wanted to buy a fuel line from them. They didn't have photos. I didn't feel like going on faith, so I bent my own. I always was curious about their stuff though.

I think there are pics of the stainless lines on my blog,.. They have nice stuff. i was very pleased with quality and fitment. No dicking around. It all went in nicely with no modifications

[thaddeussmith]

Do you have any pictures of the stuff from classic tube? I wanted to buy a fuel line from them. They didn't have photos. I didn't feel like going on faith, so I bent my own. I always was curious about their stuff though.

I think there are pics of the stainless lines on my blog,.. They have nice stuff. i was very pleased with quality and fitment. No dicking around. It all went in nicely with no modifications

i think you should start pre-bending the OEM lines you send out.

[///mChris]

Blunt,

Where is your blog?

Thanks

[AceAndrew]

Looks like IE has some nice ones for $90.00

http://store.nexternal.com/shared/StoreFront/default.asp?CS=ireland&StoreType=BtoC&Count1=451503932&Count2=368644356

Who else carries them beside Blunt and IE?

[thaddeussmith]

Looks like IE has some nice ones for $90.00

http://store.nexternal.com/shared/StoreFront/default.asp?CS=ireland&StoreType=BtoC&Count1=451503932&Count2=368644356

Who else carries them beside Blunt and IE?

those aren't the hard lines from the BMC to the t-junctions. Those braided lines go from the junctions to the calipers (but, yes they are nice)

[AceAndrew]

those aren't the hard lines from the BMC to the t-junctions. Those braided lines go from the junctions to the calipers (but, yes they are nice)

Ah, I misunderstood what was being asked then. Thanks for the clarification.