Jump to content

Russ Keller

Solex
 View Profile  See their activity

  • Posts

    61

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Russ Keller

  1. Russ Keller
    Very cool! pun intended. Where were you able to purchase the dry ice and how much was it?
  2. Russ Keller
    One pair of deep grills in decent condition. Need to be polished & repainted. Left is missing reflector. Willing to trade for good left shallow grill paypal rkeller@waterreclaim.com 919 235-2562 posted 8/10/2020
  3. Russ Keller
    Drivers side, left fender for 1972. New or used in good condition if your in NC I will drive to pick up. Russ call or txt 919 235-2562
  4. Russ Keller
    The sellers name was Carlos Castro from Vineland, NJ. He said the car was a single owner from Cape may that had it stored for years in a shed. From all the pictures it looked ok, and it ran. I missed out on two others in my price range and this looked good enough to put the money down, so I'm not too bummed. It is more of a project than I had expected.... I'm only now finding the goodies after taking out the interior and carpet. The rest of the car is actually pretty solid. I imagine the front was exposed to the climate. I do know the rockers have been replaced, and there is some fresh metal between the firewall and the drivers upright portion of the floorboard. I plan on getting it up on the lift next week and will post some better pictures. Chin up everyone. ?
  5. Russ Keller
    The fitment on the rest of the fender on both sides is OK, the tab looks original on the passenger side. I wonder if I go new OEM fender or find a cheap OEM used fender that may be damaged but has a properly formed tab, cut off the OEM and weld it onto this fender? Any suggestions here would be appreciated.
  6. Russ Keller
    Hey Ray or anyone, What is the screw hole behind the tab for?
  7. Russ Keller
    So... bad aftermarket fender slapped on over the crud underneath. Plan then, ( and please correct me if I’m wrong ). 1. strip car, including interior, gas tank, hood, trunk, fenders, glass, bumpers, engine and tranny. 2. place body in rotisserie. 3. do it right. I think that about covers it. oh yea! 4. plan on spending more money than car is worth.... cant wait! Sounds like fun
  8. Russ Keller
    This 72 is new to me but this fender install just looks wrong. I’m thinking of pulling them off and redoing... specifically the rear mounting tabs and this painted over goop where the fender is bolted in.
  9. Russ Keller
    I just ordered a roller hoop. We’ll take off the drivers fender, windshield & dash then probably cut that area out from inside the car, treat or take out as much rust as possible from underneath, fab a new piece and stitch it in. Rest of the cars not terrible.
  10. Russ Keller
    I just ordered a roller hoop. We’ll take off the drivers fender, windshield & dash then probably cut that area out from inside the car, treat or take out as much rust as possible from underneath, fab a new piece and stitch it in.
  11. Russ Keller
    that gray bit is the end of a metal floorboard plate.
  12. Russ Keller
    Hi Brandon: sway bar + linkage and mounting brackets for 71 standard 2002
  13. Russ Keller
    Thank you for that advice. I'll be flipping that tie rod over right away. As far as the rest goes: It's sounding like an engine removal, and a car cradle maneuver. I would rather do it right and be done with it. Most of that I can probably do with a cut-off wheel a mig, air hose and parts. Still would be happy to pay for experienced help if anyone is in the area. Wake Forest, NC
  14. Russ Keller
    OK thanks, Here's the other two area's Rat Hole and Passenger inner rocker/footrest hole. Sorry it posted the rocker pic 1st and rotated it 90 degrees... The rat hole is 2nd and was inverted???
  15. Russ Keller
    Now the carpet is out and I'm sniffing around. Up under the dash on the firewall there was all this seat stuffing poking out of a little hole that when vacuumed out turned out to be a big nasty hole with a bunch of rat debri... Not sure what to do here. The firewall on the engine side looks perfect so there must be a cavity here between the upper part of the floorboard and the engine firewall. I can see some wiring up in there but have no clue what the best plan of action is here. The rest of the car just got out of paint and this wasn't addressed by the previous owner before paint... Help and advice greatly appreciated.
  16. Russ Keller
    I have three areas that I need guidance on. First the drivers front frame rail that extends from underneath the drivers floorboard. It looks like brake fluid and automotive lifts have taken their toll and it's pretty beat up. I live in Wake Forest, NC and am looking for advice on repair and recommendations on people who do this type of repair in NC around Raleigh.
  17. Russ Keller
    for a 1972. any out there? Thanks, Russ 919 235-2562 rkeller@waterreclaim.com
  18. Russ Keller

    Hi Andrew:

    any license plate lights left?

    Thank you,

    Russ

    919 235-2562

  19. Russ Keller
    still available? just need front + links and supports Thank you, Russ 919 235-2562 rkeller@waterreclaim.com
  20. Russ Keller
    mines MIA. 1972 stock bmw 2002 front sway bar. Need bar and linkage and mounts. Thank you, Russ 919 235-2562 rkeller@waterreclaim.com
  21. Russ Keller
    Are any of these still available?
  22. Russ Keller
    For 1972 model. please call text or email rkeller@waterreclaim.com 919 235-2562
  23. Russ Keller
    needed for a 1972 model Please call or email russ 919 235-2562 rkeller@waterreclaim.com
  24. Russ Keller
    Interested please email with shipping cost to NC, USA rkeller@waterreclaim.com
  25. Russ Keller

    Russ Keller

    Russ Keller posted a Community Map marker in Members

×
×
  • Create New...