Jump to content

stone02

Solex
 View Profile  See their activity

  • Posts

    682

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by stone02

  1. stone02
    Hi, that is the newer style eyelet. if you can find the old style it is all steel and much heavier duty. look for one in any clutch car. the eyelet size is a larger diameter, outside. and i have NEVER had the old style break. good luck stone stone racing co
  2. stone02
    Hi, the studs can usually go in hand tight as above. sometimes you have to double nut the stud and run it down to the shoulder. loctite is okay. on the upper studs the hole goes thru to the valve spring area. the short end of the stud , therefore, must be installed into the head. make sure that the stud doesn't touch the spring. this may sound goofy but i have seen many studs that were rubbing on the spring. good luck stone
  3. stone02
    Hi, the studs can usually go in hand tight as above. sometimes you have to double nut the stud and run it down to the shoulder. loctite is okay. on the upper studs the hole goes thru to the valve spring area. the short end of the stud , therefore, must be installed into the head. make sure that the stud doesn't touch the spring. this may sound goofy but i have seen many studs that were rubbing on the spring. good luck stone
×
×
  • Create New...