Jump to content

Ryan_71-02

Solex
 View Profile  See their activity

  • Posts

    167

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Ryan_71-02

  1. Ryan_71-02
    Grills are still available, $50 plus shipping and they are yours. Dashes are junk, trim is available just tell me what you want.
  2. Ryan_71-02
    Both stub axles have so/so threads, splines are decent on #1, splines on #2 are much less grooved. No visible crack anywhere on the axles. Bearing areas just need a good polish on a lathe. When I say that, I'm referring to what I do with axles I am reusing. Which is taking them to a crankshaft shop or just engine/machine shop and ask them to do a quick polish to the bearing areas the same way they polish crankshaft journals areas. Makes 'em shine like new. $40 plus shipping? I'm sure I can get them in a flat rate box. Let me know and I'll get everything shipped today. Ryan
  3. Ryan_71-02
    Rctid, The stub axles look decent where te bearings ride, but the threads for the castle nut are a bit rough on one axle. Might be able to clean them up, I'll post some close ups for you.
  4. Ryan_71-02
    Rctid, One e-brake boot has a small tear in the obvious location above the threaded cable end, the other is hole free and needs a little soap and water. As far as the license plate frame mount and lights, not sure if the lights work and the mount has surface rust, but nothing that couldn't be taken care of. I'll send you a few pics after my camera battery charges $20 plus shipping?
  5. Ryan_71-02
    (nt)
  6. Ryan_71-02
    (nt)
  7. Ryan_71-02
    That's the plan. No money as of yet, but getting my ducks in a row. REALLY, I want my damn garage finished and organized! lol
  8. Ryan_71-02
    (nt)
  9. Ryan_71-02
    (nt)
  10. Ryan_71-02
    (nt)
  11. Ryan_71-02
    more pics
  12. Ryan_71-02
    *NOTE: I work full time through the week and am not ignoring you My days off are Tuesday and Wednesday, everyone that has contacted me will be taken care of first come, first served. Didn't realize what a time suck this would be, 30 emails in two days..... *NOTE: Dashes have a few imperfections topside, but the mounting points underneath are pretty bad. One has both corner studs completely gone. *NOTE: Bilstein's are for the most part cores. They have rebound, but easily fully compressed by hand. PENDING/SOLD/SPOKEN FOR: '71 BUMPER SPACERS DEFROSTER HOSES AIR FILTER HOSE CENTER CONSOLE W/ SPEAKER CUTOUT LICENSE PLATE FRAME 1 E-BRAKE BOOT MY APOLOGIES, I'm in West Seattle 98126. PAYPAL is my preferred payment method I could make a huge list of what I have, but I'd rather just let you browse the photos and make me an offer. And when I say make me an offer, lets just say, I'd rather throw it away than clean it off for pictures But there is a part of me that knows somebody could use some of this stuff; and a few items are actually worth a couple bucks. Email me with any questions. Thanks, Ryan
  13. Ryan_71-02
    I'll take it. It'll make swapping out 5spd's MUCH easier. My spare 5spd is an '80 with the 4-bolt flange. Email me to work out payment. Ryan
  14. Ryan_71-02
    I too will take and oil pump. Shipping to 98126? Thanks, Ryan
  15. Ryan_71-02
    I've never seen one like that before. What's it off of, and how bad is the pitting around the hose flangy-ma-bob's? Ryan
  16. Ryan_71-02
    Seat on the right looks exactly like the Recaro SE Driver's seat I have in my '75, minus the "SE" below the RECARO embroidery of course. If you ever feel like parting with it, let me know HAHAHA. Ryan
  17. Ryan_71-02
    Better yet, cap off the hard line at the source; right at the gas tank. No fuel wandering between the tank and the engine bay... Ryan
  18. Ryan_71-02
    I vote Heads Up in Auburn, and Autosport in Downtown.
  19. Ryan_71-02
    Yeah, Joanna and the boys are the first person I call!
  20. Ryan_71-02
    I used Heads Up in Auburn WA. They are awesome and work on nothing but cylinder heads. They did all the machine work and assembled the head for me a couple years ago. Been sitting in a sealed plastic bag ever since and am just now getting the last of my sidedraft engine parts together for the build. Just want to run into the least amount of problems... Ryan
  21. Ryan_71-02
    I've got a Recaro SE tan Driver's seat...
  22. Ryan_71-02
    Thanks guys. Just what I wanted to hear. Shop said Saturn motors use the same style of bearings and tools to install them. Wonder how many heads have been chucked because of chewed journals
  23. Ryan_71-02
    Anyone have any objections or problems with running cam bearings? The head had a seized camshaft cut out of it but was amazingly NOT warped. Has anyone else ever run with them? Should I toss it and find another head? Search turned up little mention of camshaft bearings. Ryan
  24. Ryan_71-02
    Just four of the many parts I want to get rid of. Subframes are from late model 74-76's. Perfect for those wanting to freshen up a rear suspension off the car and make a quick swap. Also have matching rear control arms. Next, 2 1-piece dashes. One from and automatic, the other a manual. A few cracks here and there, but much better than some I've seen around in daily drivers. I'll have pictures posted later tonight. Make me an offer. I need it gone. Ryan 253.347.7237 West Seattle
  25. Ryan_71-02
    I'm in. Car is dead at the moment, but I'm in. Moohahaha! 1- GrigioMpwr - Rear kit 2- ponchis - Rear kit 3- Ryan_71-02 - Rear kit
×
×
  • Create New...