Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Request Jetting prescription for 38 DGMS Carb.


Recommended Posts

CD 02 MD.., or anyone Could you give me an excellent jetting prescription for a 38/38 dgms manual choke version carb for a 2002 engine with some rod lightening, and balancing. Engine has 284 schrick and 9.0/9.5:1? compression tii pistons w/121 head w/some porting, and windage tray oil pan. Apx 670 ft above sea level. During the dyno time I Will be using two types of headers Stahl, alpina, and tii exhaust manifold which will be used in the final install. After the study, and fluid leak checks I may be inclined to utilize headers. Thanks in advance.

Link to comment
Share on other sites

David's jetting is close to what I was running.

You may find that bigger transition (idle) jets help getting the

mixture rich enough at low throttle openings.

I think I went as high as 60 or 65 with a smaller (135) main jet.

And smaller air correctors (as small as 140, iirc)

But if you have dyno time, take a range of jets. Getting the

mains right is easy on this carb- it's the 'cruise at 70' range that's harder.

The thing flows too much air too easily to get a good

vacuum signal at our freeway speeds...

t

  • Like 1

"I learn best through painful, expensive experience, so I feel like I've gotten my money's worth." MattL

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...