Rota RB 15'' fitting on 1975/2002

[02fireman]

Anybody here have these and did they just bolt on with the 57.1 hub size or did you have to change the bolt (if possible) to a 14mm as suggested by rota?

[ApexFactor]

Mine came from a honda so the offset and centerbore are probably wrong but I inquired from rota and they said the new ones are made specifically to bolt up to the stock hub.

Mine I run a 1/2 inch spacer and a hub centric ring on the fronts, the rear is fine.

[TobyB]

Not such a good idea with the bolt changing-

12mm are plenty strong.

Do use the right nuts, tho, not that I know what the right ones

for the Rotas are...

Someone should give me a set of 'em, then I'll tell you!

heh

t

[02fireman]

Thanks. Just got nervous because the dealer and Rota both told me that these wheels require 14mm bolts...but if these are the same wheels that everybody seems to be using then, good.

[cj]

I keep the 15" RB's in stock with the proper offset and center bore. Let me know if you're interested.

800.656.1118 or e-mail me.

Cris

[02fireman]

I keep the 15" RB's in stock with the proper offset and center bore. Let me know if you're interested.

800.656.1118 or e-mail me.

Cris

what offset and bore? and do they require 14mm bolts or will 12mm work? Rota claims they only make 14mm but I imagine the nuts will hold them in.

Thx.

[TonyHavana]

Hey Fireman

If you look at my post half way down the page titled

That was Then............you will see the same wheels, that I got from Cris and put on earlier this week.

Cris sends the proper lugnuts and emblems,

and they just bolt straight on. Perfect fit and great service from Cris.

[02fireman]

Hey Fireman

If you look at my post half way down the page titled

That was Then............you will see the same wheels, that I got from Cris and put on earlier this week.

Cris sends the proper lugnuts and emblems,

and they just bolt straight on. Perfect fit and great service from Cris.

Great thanks, but the problem is the wheels are on the way and I didn't see Cris's ad earlier. I just want to make sure i'm not screwed when the wheels arrive. I want to make sure I have the proper wheels..15x7 et25 4x100. my only question was about the 14mm holes.....thats what worries me. Thanks again.

[cj]

I keep the 15" RB's in stock with the proper offset and center bore. Let me know if you're interested.

800.656.1118 or e-mail me.

Cris

what offset and bore? and do they require 14mm bolts or will 12mm work? Rota claims they only make 14mm but I imagine the nuts will hold them in.

Thx.

I had them done with a 25mm offset and DO NOT require a 14mm bolt. The center bore is 57.1mm.

Cris

[02fireman]

I keep the 15" RB's in stock with the proper offset and center bore. Let me know if you're interested.

800.656.1118 or e-mail me.

Cris

what offset and bore? and do they require 14mm bolts or will 12mm work? Rota claims they only make 14mm but I imagine the nuts will hold them in.

Thx.

I had them done with a 25mm offset and DO NOT require a 14mm bolt. The center bore is 57.1mm.

Cris

If I can return these then I will definitely give you a call. Dammit I knew something like this would happen. I just can't believe Rota would make the same wheel with both 14 and 12mm holes. this sucks.....

[justinevert]

I am looking around for a set myself. My email is justin_evertatsbcglobaldotnet.