Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Interior Lock Door Trim Piece?


Zoeydebord

Recommended Posts

Hi  all,

 

My car has some custom door cards  installed  by PO.

 

They didn't include a hole or the trim piece for the interior locking tabs.

 

I thought I could drill these out and install the plastic trim pieces, but there doesn't seem to be a part number for  them?

 

Best, Z

Link to comment
Share on other sites

I made my own panels but used the stock metal trim piece. It was a PITA to mount properly so I guess the PO took the easy way out.
 

I am sure you could fab in  a piece on to the backing assuming (it’s a solid substrate) that will produce that bulge to accept  the lock button and rod…but it would be easier if you could source out the proper piece. In either case it forces you to dismantle part of the door card.

 

hopefuuly you can find a pair of bagged door cards unless some else has a fix, good luck!

Edited by joysterm
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...