IE cast Pistons 9.5:1 E21 head

[Bm2002w]

E21 9.5:1 cast Pistons from IE. 90mm. Asking $250 US, shipped at buyers expense.comes with rings and wrist pins. NEW!

Edited December 31, 2016 by Bm2002w

[Naz]

Would these work on a 121ti head? Also, are these forged or cast? They look forged.


Sent from my iPhone using Tapatalk

[Conserv]

I'd be shocked if 9.5:1 pistons for an E21 head also fit a 121ti head!  And why does the third photo in the original post refer to an E12 head?  The E21 and E12 heads are similar but at a 9.5:1 compression ratio, I believe their pistons are also not interchangeable (without modifications).

 

Regards,

 

Steve

 

Edited January 4, 2017 by Conserv

[Preyupy]

9.5:1 pistons for a E21 head WILL NOT clear any other cylinder head (118,121, 121ti, E12) without either modifying the head or piston for clearance.  Those are Cast pistons. 

[Bm2002w]

Third picture says E12 only because that is the box they came in...they were E21 pistons in an E12 box.