efi Obx Individual Throttle Bodies

[SydneyTii]

I wish I spoke Spanish! This is exactly what I am interested in!

[SydneyTii]

Anyone have any idea how you use throttle bodies with a standard pump. The A4 certainly had a regular pump but the A4s didn't.

Anyone have any idea how you use throttle bodies with a standard pump. The A4 certainly had a regular pump but the A4s didn't.

[SydneyTii]

Oops double post, apologies.

[stuff]

His FB posts suggest his English is pretty good!

[flybmw02]

To Answer your linkage question Mildseven is that I made my own its a center pull from under the throttle bodies I don't know if you will have room there because my starter motor is not under its reverse mount on the bell housing.

John 

[SydneyTii]

Chatted with Remco, and it appears a good solution if you want ITB's and to keep the kuglefischer, In essence you end up with a similar approach to an Alipina A4, I will be going down this route apparently he just got the vendor to thread the injector mounting holes to suit the Tii injectors, runs headers and a slightly warm Cam.

Chatted with Remco, and it appears a good solution if you want ITB's and to keep the kuglefischer, In essence you end up with a similar approach to an Alipina A4, I will be going down this route apparently he just got the vendor to thread the injector mounting holes to suit the Tii injectors, runs headers and a slightly warm Cam.

[infinkc]

also curious if anyone has tried these yet.  i may give them a shot.

[jdeitch]

Regardless of their masturbatory habits, Jenvey makes some slick hardware, but I am biased in more ways than one.

Looks good. Is there a brake booster under there? More pics please.

[stuff]

As requested. The booster is a non-Tii type. The EDIS module shown mounted on the passenger inner fender has since been removed.

[steve k.]

I have been running Extrudabodie injection set up for a few years now. Absolutely love it. Had to build my own airbox to get the air fromt he front of the car, but the rest is flawless and pretty . Theya re also a pleasure to deal with. They developed a kit for the m10 on an e21. Shop them you manifold, they will mount the everything to it an ship it your way.

 

Look at the photo album for details

 

 

steve k.

[stuff]

Steve - is the air box shown in your gallery based on the pipercross PX600 air box?

http://www.pipercross.net/competition/products_600_airbox.asp

Thanks,

Colin

[steve k.]

Yes, it is. Had to hack it up a bit since it turns in the wrong direction due to it being built for FWD cars