Need 2 ruber trunk plugs and rubber on door for light switch

[josh72ooh2]

1- I have a hole that is about an inch in diameter in my spare tire well that needs a plug.

2 - I also have a smaller hole near the center of the tire well that is about a cm in diameter that needs a plug (i may be able to get something at the local hardware store).

3- i also need the rubber bumper that mounts on the door and presses the A-pillar light switch when you close the door.

If anybody has all three, or #1 and 3, in pretty good shape,

let me know how much with shipping to 90066. Thanks.

-josh

[harry6422]

Hi Josh, missed you at the vintage meet this year, you can find the part # for the plugs you are looking for at this site, best I have found yet for numbers of those odd little parts.

www.penskeparts.com

Harry

[josh72ooh2]

Thanks Harry.

I don't know which plug to get for the trunk. The door i can figure out with parts diagrams but the plug diagram 41/10 is a bit vague.

I didn't see many of the typical characters at the So-cal Vintage this year.

Maybe it was too big of an event? haha. Is there such a thing?

I know a handful of buddies couldn't make it.

-Josh

[eastsidebimmer]

As a coincidence, I also need the rubber plugs for my project. I started a thread on the general section--no replies yet.

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,366145/

[Gnomeslayer]

http://www.wallothnesch.com/karosserie-blechteile/bmw-1502-2002-turbo/katalogbild-41-05.html

[jgerock]

I removed an aluminum plug from the well of my 69 2002.  It got sort of mangled up but I can save it for reinstallation.  I have not been able to locate that item on the parts diagrams.  Could easily measure the opening and use a rubber plug from hardware store.