Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

The Heist.


heist

Recommended Posts

Good to hear. After browsing these forums I feel like I would get more criticism for my plans then appreciation haha. I'm planning on documenting my whole build so stay toned should be a little different from the normal outlook.

Link to comment
Share on other sites

So, what are your plans? Coils? Bags?

What about the motor? Please, do it right. There's nothing I hate worse than a slammed car with $3000 poke n'stretch BBSs with NO attention to detail.

Patrick Sloan

1975 inka 2002 - 2375719

1991 325iC

2001 325i

Link to comment
Share on other sites

First to get the car in decent running condition. I have seen some ghetto rigged stuff, but this car tops it all. Parts were held in with tape and glue. Lots of plywood for some reason.

I'm trying to take on some of the rust in the interior right now. Then I'm going to put the battery and a fuel cell in the trunk.

As far as what I want to do with it is coils, mesh wheels with a lip, race interior, and in time get it running with ITB's and an engine rebuild ( camed etc)

Shoot for new paint within the year. I painted the G35 in my garage and did everything myself, which I plan to do with this car also.

Link to comment
Share on other sites

Still working on getting everything out. Man this car has some serious rust. After I patch the holes I'm going to put in my racing seats.

427.jpg

I would love some help with my wheel fitment. I'm going to get IE coilovers and then want to stuff some 9" wide wheels under her.

These:

16x9.0 4x100 15 57.1 3.0"

http://www.esmwheels.com/main/product_info.php?cPath=21_50&products_id=83

My main concern is will this have any problems other then hitting the fender. Also I picked up Lee's massive brakes so would i need a spacer to make it fit or would they fit? Thanks if anyone can point me in the right direction.

Link to comment
Share on other sites

I want a stretch, but mild. Not the whole bent broken look. I don't mind a few degrees of negative camber. On my g35 I had -5/-6 up front and -3/-4 in the rear. I can handle that.

Wanted the tire size to be: 9_215_40_R16_Toyo_T1R

Just stressing if it will clear the brake and fit in with the suspension since coil since the strut/shock is so damn close.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...