Roll Bar

[Gbare02tii]

15x7 front 15x8 rear. we removed the stock mounts in the car and welded in lower brackets to the floor. being 6'2, my head was hitting the top of the car when the e30 seats had been bolted to stock mounts

[mo's72tii]

My 69 M2 shell came with a set of perfectly installed alpina flares. I have a set of epsilons that are same size as yours. I am having lips made for the fronts so they are 15 x8 et 0 all the way around. How about some more pixs of you car?

15x7 front 15x8 rear. we removed the stock mounts in the car and welded in lower brackets to the floor. being 6'2, my head was hitting the top of the car when the e30 seats had been bolted to stock mounts

[Gbare02tii]

mine is a 69 2002 as well with a full Tii swap and alot of other goodies. real Zender flares and airdam.

[nevadainMN]

I'll answer b/c I've got the same seats in my car. Yes, Recaro sports from an e30 cabrio, "is," etc.

iS seats are not the same as cabrio seats. The direction of the stiches is different (top to bottom vs left to right). The cabrio seats are like te e30 M3 seats.

The other difference with Cabrio seats is the outside lever to tilt the seat forward. On the cabrios its a little stub piece like the inside one on the passenger seat as opposed to the longer lever on these seats. If you put an "is" or M3 seat in a cab you can't recline it or slide it all the way back because the rear seat area is much narrower and the levers hit right behind the doors.

That would make these E30 M3 seats and as we all know any car with M3 parts is at least 10% faster than without them. :-)