Cams- Norris 305, 300, and two 275's

[john1180]

Fresh Norris 305, just polished and spec'd at Delta cam( max lift 295) $100, unknown maker 300 cam, spec sheet from Delta available(max lift 290) $100, two 275 cams, spec sheet from Delta available( max lift275) $35. email me for a complete copy of the spec sheets jmschneeman@msn.com

[williamggruff]

John,

What's the lift on the Norris 305?

[john1180]

John,

What's the lift on the Norris 305?

I don't have the spec handy, I'll have to get back to you tomorrow. John

[fiftytakedowns]

I thought stock camshafts were 262

[s99]

I'm interested in the 300. The spec sheet would be great! Thanks!

-Scott

[john1180]

I'm interested in the 300. The spec sheet would be great! Thanks!

-Scott

I can scan them tomorrow and email it to you.

[john1180]

John,

What's the lift on the Norris 305?

Max lift is 295

[williamggruff]

My apologies, John. I should have been more specific with my question: what is the max lift in millimeters? In other words, how far is the cam moving the rocker? I'm wondering what type of springs I'll need, whether I'll need to lash it up, and whether I'll have any potential issues with piston/valve interference.

[john1180]

My apologies, John. I should have been more specific with my question: what is the max lift in millimeters? In other words, how far is the cam moving the rocker? I'm wondering what type of springs I'll need, whether I'll need to lash it up, and whether I'll have any potential issues with piston/valve interference.

Not really sure, if you send me an email, I'll be happy to send you the complete print out on all the cams from Delta. jmschneeman@msn.com

[soul]

I'll be glad to take that 300 cam off your hands. alexphomthavong@hotmail.com