How to Replace tii Linkage Cup in Kugelfisher FI Pump

[jgerock]

My rubber boot and snap ring are long gone - but the car seems to run OK without it.

Anyone know where to get a replacement?

[jgerock]

I've posted a "WTB" separately - but will look for a slip-on boot at work that may do the trick. I used a similar one to seal an outlet stub on my VW fan shroud. Will report back with my findings.

Thanks to Bill R. for reminding me of the missing cup/boot. And to think I was just about to bolt the throttle body back on to the plenum.

[Bill_Riblett]

I'll see if I have a usable spare boot.

[jgerock]

I was able to find a suitable plastic cap at work today. It slipped on tight so I won't have to use a zip tie or hose clamp.

The throttle body "stub" measures about 0.80" which increases to about 0.85" at the "ridge".