engine and drivetrain Machine shop in Portland OR?

[djm1968]

Gents,

Planning the rebuild of my s14 and will need a machine shop to prep the block, rods, crank, etc. I will likely have the head done by an s14 specialist; however, I think the bottom end can be handled locally. "Dan Hall" machine shop is right down the street from my house -- an experience with this shop? Any other local suggestions for s14 engine work?

Cheers,

DJM

[-=Charley]

I took a block and some diff output flanges to Bearing Service and they did a great job. definitely well experienced.

[gracer]

Dan Hall has done the machine work on my race motors for the last 20 years. G

[gracer]

Dan Hall has done the machine work on my race motors for the last 20 years. G

[djm1968]

Dan Hall has done the machine work on my race motors for the last 20 years. G

Good to hear. BTW, are you running an m0 or???

Thanks,

DJM

[captain-orange]

No personal experience with Dan Hall but I've heard nothing but good things. That's where I'll be taking my motor to be bored and stroked.

I hear one of the guys that works there has an 02 as well!

[djm1968]

No personal experience with Dan Hall but I've heard nothing but good things. That's where I'll be taking my motor to be bored and stroked.

I hear one of the guys that works there has an 02 as well!

Yes, there is a silver 02 often parked along side the shop.

Great to hear Hall's shop has a good reputation -- they 2 (short) blocks from my house.

Cheers,

DJM