70 M2 build

[ray_]

Which injectors are those? EVOs are green.

 

Also, drive it!

 

[kris]

Which injectors are those? EVOs are green.

 

Also, drive it!

 

 

This has been a long project.  Even the esteemed Ray is forgetting what he's asked...

 

http://www.bmw2002faq.com/topic/119598-70-m2-build/?p=7291

 

Volvo 850 Turbo (Orange Tops) - Bosch p/n: 0 280 150 785 high impedence 305cc/min. @ 3BAR fuel pressure 

Evo III injectors are bosch's part # is 0-280-150-355 300.6cc/min, 43.5psi 3 bar

 

I got the idea for the orange tops from S14.net

[ray_]

I thought they may have changed since then.
 

[M3M3]

i run the stock injectors...but a porsche 944 FPR.   3.5bar FP instead of 3.0bar.

 

either non-stock injectors or higher FP require an aftermarket ECU, custom chip or alpha-N to remap for the higher fuel flow.

[kris]

i run the stock injectors...but a porsche 944 FPR.   3.5bar FP instead of 3.0bar.

 

either non-stock injectors or higher FP require an aftermarket ECU, custom chip or alpha-N to remap for the higher fuel flow.

I'm running alpha-N which will be tuned by a local shop.

[kris]

I was able to get an unrestored Alpina 4 gauge pod from a FAQ member. I had it wrinkle coated.

It would have looked like this back in the day.

Edited February 28, 2016 by kris

[ray_]

Krinkle koated.

 

You should do your car in black and white.

 

[kris]

Strut tower brace in place, approx 3" of clearance from the top of the valve cover to the bar

 

Edited March 8, 2016 by kris

[jgerock]

Kris - what is the gold-colored piece?

[M3M3]

Kris - what is the gold-colored piece?

the heat insulation on the wing, or the fuel pressure regulator on the fuel rail?

[kris]

Kris - what is the gold-colored piece?

Jim, per Marshall, are you talking about the reflective heat insulation?

I developed an affinity for it when I restored the tii. The header is pretty meaty and there was a bunch left so we added it to the wing.

[Ian]

Kris, I love your diff hanger.  

 

I've been thinking about making one similar to yours for my e21 Alpina diff cover, to tie in to the diff brace from my roll cage.  Do you have any pics of your hanger installed, from the top side and from underneath?

[kris]

Kris, I love your diff hanger.  

 

I've been thinking about making one similar to yours for my e21 Alpina diff cover, to tie in to the diff brace from my roll cage.  Do you have any pics of your hanger installed, from the top side and from underneath?

Makes sense given your new diff. I'll take some for you next week.

[kris]

Here you go Ian.  I have higher res I can email if you need. 

 

 

 

Edited March 17, 2016 by kris

[Ian]

Thanks, Kris, that helps a lot.  Are the mounting ears welded to the floor, or are they part of a removable bracket assembly?  

Edited March 18, 2016 by Ian