1967 1600 Hazard Switch???

[barvarianbox_83]

Is this a 3 or 4 prong switch??? Will the lather switch 4 prong switch for a 2002 fit on a 1600. The switch mounts under the dash on the 1600s.

[pkbinplano]

it's a three prong switch. I Have one if interested. A four prong switch might work but you would have to ohm it out with a meter and provided it's just individual connections and not a gang style plug

[jgerock]

BMW must have changed the switch location (and style) over the years.

In the BMW Blue Book, there is a pull-switch mounted under the left-side dash cardboard piece.

Ben's Nevada 1602 has the switch in the left-hand instrument binnacle "cubby"

Later cars had a push button in the console.

[barvarianbox_83]

Yeah I'm still learning about the little differences on these cars compared to the 2002s. Thanks for the info!!!

[tjones02]

Yeah the original 6V cars had a three prong hazard switch on a pod below the steering column.

http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,338996

[jgerock]

Yeah the original 6V cars had a three prong hazard switch on a pod below the steering column.

http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,338996

Tom - the version in the Blue Book didn't have the little "pod". The switch was mounted in the cardboard piece (where everyone usually installs a small speaker).