Header & Sway bars BOTH SOLD

[jdb]

Header has been rebrazed @ cyl. #2 years ago Glass beaded and VHT painted Comes with trans bracket. $125.00 plus shipping

Front sway bar is flat, no up and down bends, 22mm will not fit with A/C or smog pump.

Rear is a ST 19 adustable both come with hardware but rear will need new frame bushings. $125.00 plus shipping.

These bars worked very well on my 02.

Located in N.Ca.

Jeff

[Burleigh]

How much for the sway bars shipped to 72756?

Also, are those Stahl headers? If so, I may be interested in them too.

Thanks!

Richard

[jdb]

How much for the sway bars shipped to 72756?

Also, are those Stahl headers? If so, I may be interested in them too.

Thanks!

Richard

$24.00 for ground on the swaybars.

The Headers are Stall copies. I believe them to have been sold by Hardy&Beck

[mossyboy6]

Separate the trans exhaust bracket?

[Fishhead]

How much for the sway bars shipped to 72756?

Also, are those Stahl headers? If so, I may be interested in them too.

Thanks!

Richard

$24.00 for ground on the swaybars.

The Headers are Stall copies. I believe them to have been sold by Hardy&Beck

That header looks identical to my Stahl. My header has "STAHL" stamped in the header flange between 1 and 2 and has some numbers stamped between 3 and 4.

I recently bought mine and I was worried about the possible interference with the steering linkage and stuff (I did a search and that seams to be a common problem with the Stahl and other headers), but it clears nicely with out anything touching anywhere.

I didn't take any pics of my header, but here is a Feebay link where I got it. It was listed as a Supersprint, but it is a Stahl.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220583712388&viewitem=&sspagename=STRK%3AMEWNX%3AIT

Here's a link to ScottNC's header. He doesn't say what it is, but it looks identical.

http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,333807/highlight,headers/

[jdb]

This header has no "Stahl" label welded to one of the primary pipes but it does have the # 679

1082

Stamped bettween cyl. 3&4

I never had a issue with steering linkage of frame rail interferance.

I ran this header for years on my Hot Rod (RIP) just had to repaint every couple of years.

[ryansti]

How much for the header shipped to 95628?

[jdb]

How much for the header shipped to 95628?

looks like $25.00 ground

[ryansti]

How much for the header shipped to 95628?

looks like $25.00 ground

Email sent, I will take the header

[ryansti]

Payment sent on the header.

[jdb]

Payment sent on the header.

Thanks!!,

Jeff