WTB ATS Classic center caps

[Johnny Riviera]

Hello,

 

Just picked up some 13x6 ATS Classics, and as the title states, need the caps. Anybody have some they’d part with?

 

Or, is there a good alternate? Perhaps E21 Basketweave caps if anyone know if those fit? 

 

Thank you,

 

John

[cscmanagement]

I have the same …. use micrometer and measure opening (forgot size ? 62mm) … found that ordering plastic "clip ones" that fit the opening with new BMW metal backed emblems(?58mm) look great....fit FLAT to opening and 58mm (think that's correct MEASURE YOURS) AND... "BMW" is much bigger and better looking. or you can get "OZ" ," M" etc

[cscmanagement]

forgot....  do measure YOUR opening..... think 62mm BUT I found it was odd and no caps I could find was correct… let me know and will try to chase size … also my wheels are ATS Classic...BUT GM with VALVE stem is "inside"  spoke where hits rim …. other is on  rim NOT in spoke.

[Johnny Riviera]

Thanks for the tip! Mine don’t have the GM logo, though I have seen those. 

 

I will measure!

 

Thanks,

John

[shermanmartinez]

I have some ATS center caps. Do you have a picture of what the original center caps look like?

shermanmartinez at Hotmail dot com

[Johnny Riviera]

I think they look like the one in the pic. Newer ones have a slightly different logo. Prefer ones like pic, but open to the newer ones too. 

 

[RFord888]

Johnny,

 

I picked up an ATS wheel the other day as a spare tire for my set. It came with a pretty rough ATS center cap that with a little TLC would do fine. Don't need it as I fashioned BMW caps similar to above.

 

If you still need it, I send it to you free of charge. If I don't hear from you, I'll just post it.

 

Best,

 

Rich

[shermanmartinez]

I do have a couple like the ones in your picture.

 

Email for pictures: shermanmartinez at Hotmail dot com

[drola]

do not buy from sherman martinez

he will sell you a bad part, make you pay with money order so you have no protection, and then disappear on you