2002 Turbo Intake Reproduction

[Einspritz]

I recall someone on this list looking for a 2002 Turbo intake part.

 

Here is a reproduction from Italy you might want to know about.

 

http://www.moreschi.info/pezzi/bmw_2002t_tubasp.htm

 

Cheers!

[Preyupy]

Thanks,

I'll get in touch with them, I need the 90 deg elbow that is on the intake side of the Turbo that attaches the hose from the air filter to the turbo. #3

 

 

 

No.	Description	Supp.	Qty	From	Up To	Part Number	Price		Notes
01	Hex bolt	M6X45	1		06/1975	07119912327	$0.22		ENDED
01	Hex bolt	M6X45 8.8 ZNS3	1			07119902976	$0.45
02	WAVE WASHER	B6	5			07119932072	$0.09		ENDED
03	Pipe		1			11651255093			ENDED

 

<div style="display:none;">< img src="//pixel.quantserve.com/pixel/p-h8wAabTPpGCtz.gif" border="0" height="1" width="1" alt="Quantcast"/>< /div> <img src="https://d5nxst8fruw4z.cloudfront.net/atrk.gif?account=ypyPf1agwt00i0" style="display:none" height="1" width="1" alt="" /> <img src="http://b.scorecardresearch.com/p?c1=2&c2=14576572&cv=2.0&cj=1" /> <img src="https://sb.scorecardresearch.com/p?c1=2&c2=20015427&cv=2.0&cj=1"/><div style="display:none;"><img src="//pixel.quantserve.com/pixel/p-31iz6hfFutd16.gif?labels=Domain.realoem_com,DomainId.7017"border="0"height="1"width="1"alt="Quantcast"/></div>

	Message not specified.

Edited February 6, 2018 by Preyupy

[Einspritz]

Is yours broken at the bolt, or just missing?

 

I am always looking for spares,, so let me know what you learn.

 

Thanks,

[Preyupy]

This car was hit in the RF corner and the elbow and compressor housing were shattered. I need the elbow. 

[m6smitten]

Any luck on finding an elbow?  Just noticed mine is cracked.

[Einspritz]

nope, but it has not been my prime priority.

 

 

[Preyupy]

I’m still looking myself.  I may have to pull the one from my car and use it as a pattern. 

[m6smitten]

Id be in for a Repro if you make one.

[Preyupy]

I need to get wirking on it. The rest of the restoration is moving along nicely. I’ll let everyone know once I figure out who to have do it. I could easily have them machined but they need to be cast. 

Edited October 14, 2018 by Preyupy